HOME > NEWSarticle

Water use solenoid valve work principle 2024-07-21 21:48:10 internet

There is a closed cavity in the solenoid valve of the water. There is a hole in different locations. Each hole is directed at different oil pipes. The middle of the cavity is a valve. There are two electromagnets on both sides.Where to be attracted, to live or leak different oil discharge holes through the movement of the valve body, and the pores of the inlet pores are often opened, and the hydraulic oil will enter different oil exhaust pipes, and then promote it through the pressure of oil to promote it.The piston of the oil cylinder, the piston drives the piston, the piston rod drives the mechanical device movement.
Water use solenoid valve manufacturers
Shanghai Juliang solenoid valve manufacturing Co., Ltd. Address: Shanghai Hyundai Traffic Commerce Building 22nd Floor (No. 218 Hengfeng Road) Shanghai Lake Spring Valve Co., Ltd. Address: Shanghai Houpu Valve Co., Ltd., No. 178, Changxiang Road, Nanxiang Industrial District, ShanghaiCompany Address: No. 68 Yuefeng Road, Pudong New District, Shanghai
Water use solenoid valve model
Water use solenoid valve price
The general price of water solenoid valves for water is about 120 yuan. Made of high -quality brass and tungsten steel, has the characteristics of corrosion resistance, explosion -proof, durable, and pressure resistance.Safety factor.The price of water solenoid valve is related to the parameters of the solenoid valve, connecting form flange, stainless steel, unidirectional direction of the flow, the nominal diameter of 0.3 ~ 600 (mm), the price is 343 yuan.
Water use solenoid valve work principle
I. Direct water electromagnetic valve: Principle: When powering, the electromagnetic force is generated by the electromagnetic coil to lift the closure piece from the valve seat, and the valve is turned on; when the power is disconnected, the electromagnetic force disappears, and the spring is pressed on the valve seat.The valve is closed.Features: It can work normally during vacuum, negative pressure, and zero pressure, but the diameter generally does not exceed 25mm.

Related tags: news