The faucet is the popularity of the water valve. It is used to control the water flow switch, which has the effect of saving water.The renewal of the faucet is very fast. From the old -fashioned cast iron process to the electroplating knob, it has developed to the stainless steel single -temperature single -controlling faucet, the stainless steel dual -temperature dual -control faucet, and the kitchen semi -automatic faucet.Nowadays, more and more consumers to buy faucet will comprehensively consider from various aspects such as materials, functions, and shapes.
How to buy a faucet
Brightness
The chrome -plated process of the faucet is very particular, and generally it can be completed through several processes.The distinction between the faucet depends on its degree of brightness. The smoother the surface, the brighter it means that the better the quality.
Handle
When the faucet rotates the handle, there is no excessive gap between the faucet and the switch, and it is easy to open and not to slip.The faucet of inferior water is not only large, but also a great sense of obstruction.
Sound
The material of the faucet is the worst.The faucet is the overall cast, and the sound of the knock is dull.If the sound is crispy, it must be low -waiting stainless steel. It contains more iron, and the quality is one grade worse.
Label
If you do n’t really distinguish, you can choose a more formal brand.Generally, formal products have brand logos of manufacturers, while some informal products or some quality products often only paste some paper tags, or even have no labels. Be sure to pay attention when buying.
Water faucet leak treatment scheme
In the usual life, sometimes it is found that the faucet will drip water after tightening, and it is dripping from the exit of the faucet or the joints, which not only causes a lot of waste, but sometimes its sound also causes some trouble.In fact, the structure of the faucet is very simple. The maintenance of leakage can be repaired by itself. Generally speaking, as long as the water leakage problem is replaced with sealing parts such as the shaft heart pad or a triangle sealing pad in the faucet, it canhas been solved.However, before renovation, the total switch of the faucet at home must be turned off.
Regarding the leakage repair of the water faucet joint, the reason for the leakage is nothing more than the damage to the water -stop tape tied to the water faucet (fixed screw).Therefore, as long as the faucet is removed by using a plate tong, the new water -stop tape can be re -rolled on the fixed place. The following is the maintenance step: First, tie the faucet tightly, and use the plate tongReturn.Second, the threaded holes are out of the thread, and the thread part is rolled for 5-6 times on the clock.
See if the water faucet is adjusted to use the water tie piping and the clock is tied to the clock. After the final installation is completed, open the total switch to try to confirm whether it will leak water.
Even if the faucet is tightly tightened, the reason why the water will leak:
1. The reason for leaking water outlet: It is caused by the wear of the axis heart pad in the faucet.Use a pliers to rotate the cover and remove it, remove the axis pad with a clip, and replace it with a new axle heart pad.
2. The cause of the drainage of the dragon head is caused by the leakage of the gap in the lower part: that is caused by the wear of the triangle sealing pads in the cover.You can remove the screws to loosen the ties head, then loosen the cover cover, then seal the inner triangle of the cover, and replace it with a new one.
3. Drive the joint leakage: The cover -type nut is relieved. At this time, you can re -tighten the lid -type nut or put on a new U -shaped sealing pad.
If the water faucet finds that the amount of water becomes less, it may be a leakage, because the water -stop disk of the single -gun dragon head is stuck in the gravel. This phenomenon is to find a professional maintenanceist to disassemble the faucet to clean up, but if the rubber pad is damaged, it must be replaced.Generally speaking, the use of water faucet correctly does not rotate the faucet too tightly, so that the faucet pad can maintain a lifetime of 7 or 8 years.Therefore, it is generally recommended to replace the rubber pads on both sides of the hot and cold at the same time.

Related tags： news