The faucet is a switch used to control the flow of tap water, while some faucet can adjust the hot and cold water.The faucet can meet peoples basic living needs. It is necessary for our home. Lets take a look at how to buy hot and cold water faucets, how to install the hot and cold water faucets, and how to do the water leakage of the hot and cold water faucet.
How to buy hot and cold water faucets
Look at the appearance
The appearance of the hot and cold water faucet is chrome -plated, so when purchasing, when the light is sufficient, put the product in the hand and observe the arms.Wait, explain good quality.
Two look at the material
The main parts of high -quality hot and cold water faucets are generally made of brass materials, but some manufacturers will use zinc alloy instead of reducing production costs.The electroplating quality made with brass can be guaranteed. The corrosion resistance time is longer. The better the high -plating quality of brass purity, the less corrosive the surface electroplating layer.
Three look at the warranty and logo
You can see the packaging of hot and cold water faucets and quality guarantee.See if there is a production date, production address, product quality assurance logo, whether the trademark logo is clear, etc.
How to install the hot and cold water faucet
Before installation, you can prepare the tools you may use before installation. You will use the tools: wrench, waterproof tape; in addition, you must check whether the supporting parts of the hot and cold water faucet are complete. Common faucet parts are: hose, glue, glueCircles, shower, water removal, abduction, decorative hat, etc.The hot and cold water faucet is used in a lot of bathing. When installing, check which side is the cold water. Generally, hot water is connected to the left and cold water on the right.After the waterproof tape is used to wrap the joints with a few laps to avoid leakage, then twist the faucet on the interface, tighten it with a wrench, and open the switch to check the cold and cold water.
What to do if the hot and cold water faucet leaks water
1. Lifeon maintenance tool
1. One with a screwdriver in the flat mouth.
2. A activity wrench that can reach 30-50.
2. Reasons for leakage of water faucet
1. Reasons for leakage of the water outlet: Thats due to the wear of the axis heart pad in the faucet.Use a pliers to rotate the cover and remove it, remove the axis pad with a clip, and replace it with a new axle heart pad.
2. Reasons for leakage of the seam leak of the faucet: It is caused by the wear of the triangle sealing pad in the cover.

Related tags： news