The role of the steam hydrophobic valve (referred to as the hydrophobic valve) is to automatically exclude no gas such as steam condensation water and air in the heating equipment or steam pipes, and does not leak the steam.Because the hydrophobic valve has the effect of blocking vapor drainage, it can make the steam heating equipment evenly heat up, and make full use of the steam submarine heat to prevent water hammer in the steam pipeline.
Installation of steam hydrophobic valves
A filter needs to be installed in front of the hydrophobic valve, so that the hydrophobic valve will not be blocked by miscellaneous objects.But for the filter, it is necessary to clean up regularly.The water dredging valve must be paid to the installation valve before and after, so that it is to facilitate the maintenance of the hydrophobic valve.When installing, pay attention to maintaining a direction with the arrow logo installed with the hydrophobic valve.For the hydrophobic valve, installation is required at the lowest point of the device, so that the condensate can be discharged in a timely manner to ensure smooth pipelines.
Steaming water dredging valve effect
The steam hydrophobic valve is also called a soda isolation device due to its characteristics of the isolation water vapor. Its biggest effect is to prevent steam condensation water from entering the thermal exchange equipment with the steam unsaturated air.At the same time, it also has a certain energy -saving effect, which can quickly discharge the steam while not allowing the condensate to stay, so it also keeps the heater in the best state.The application of steam water sparse valves can also shorten the preheating operation time of heating equipment, which is very applicable for some intermittent production occasions.Finally, the steam water sparse valve can also reduce the amount of steam consumed by itself, so as to some extent reduce its heat loss.
Principle of steam water sparse valve
The role of the steam hydrophobic valve (referred to as the hydrophobic valve) is to automatically eliminate no gas such as steam condensation water and air in the heating equipment or steam pipes, and does not leak the steam.Because the hydrophobic valve has the effect of blocking vapor exhaust, it can make the steam heating equipment evenly heat up, and make full use of the steam submarine heat to prevent water hammer from occurring in the steam pipeline.Depending on the working principle of the hydrophobic valve, it can be transformed into three types: mechanical, thermal static, and thermal power type.
Steaming Water Valve Model
Steaming water dredging valve models are: CS49H thermal power steam hydrophobic valve GSB6/GSB8 leveraged floating ball -type steam hydrophobic valve CS45H bell -shaped float -type switch steam water dredging valve

Related tags： news