Heating water faucet includes the faucet of the essence water and the water flow control switch. The heating water faucet is equipped with a heating cavity and an electrical control cavity, which is separated by a sealing plate.The heating pipe is the insulation heating pipe; the insulation heating pipe is a hydropower isolation insulation heating pipe; most of the water faucet body is high -temperature -resistant engineering plastic type, and a few are all metal types; the electrical control cavity has an insulating hydraulic switch.
Heating water faucet brand
Kohler heating water faucet Utland heating water faucet
The principle of heating water faucet
It is generally equipped with heating cavity and electrical control cavity.Among them, the two parts of the electrical control cavity and heating cavity are separated by sealing plates. There will be a heating circuit in the electrical control cavity, and there will be heating pipes in the heating cavity.When working normally, heat water can be heated in 1 second, and the heating pipe is connected to the heating circuit.
How to install the faucet of heating water
1. When installing the heating water faucet, you must first pay attention to check the meter and line. For the current normal electricity environment: the meter capacity 5 (20) A.Rest assured installation and use.Water -cooled in winter, it is better to use the product power to be used to be more quiet, but it is necessary to consider the actual situation. A meter and line can meet the requirements. A house with a large hydraulic pressure. You can choose the power to choose the power. You can choose the power.3000W.2. Installation only needs to be installed like ordinary faucet. When installation, you can refer to the product manual attached to the product.3. First of all, it is necessary to determine whether the third line is involved. Generally, it is left zero (blue line) n, right fire (brown line) L, ground ground (two -color line yellow -green).4. After using the electric water faucet for the first time, pay attention to installing the electric hot water faucet, open the faucet (casual hot and cold position), and see that water is sprayed from the nozzle and then connected to the power.It is to prevent dried accidents).Then open to the hot water location, and the indicator light under the handle (the indicator light color is blue), indicating that it is heating. If it is not lit, you need to check that there is no connection to the power supply or the water pressure is too low.
Is heating the faucet safe?
If you install the precautions for the use of electric water faucets below, it is generally safe.1. Do not exceed 50 degrees Celsius during use.2. Forbidden inverted use.3. The nozzle must be kept unobstructed, and the sprinkler is often cleaned. It cannot be blocked. It is forbidden to access the shower sprinkler and other current blocking elements with water flow switches.4. This water heater is suitable for connection on the water supply pipe network, and connects with metal pipes to keep the product well grounded.5. Do not exceed the pressure of the signs as indicated by the tap water, and be reliable to ground.6. Users should check whether the electric meter, electric gate, fuse, circuit diameter, and circuit to water heaters should be inspected when installing. There are switches on the circuit to the water heater. The capacity of these devices should meet the current needs.7. Because the capacity of the civil power grid is generally small, you have other large -capacity appliances when using the water heater.
Heating water faucet price
The price of heating tap water is 168 yuan. Its main function is to control the water pipes water switch and water flow.The early faucet was spiral lifting. In the market, most of them were the faucet of the ceramic valve core. The spiral lifting type basically eliminated.

Related tags： news