Bathing in winter has become a common thing.And in order to improve the temperature of the bathroom, many people are used to opening the bathing bath at home before taking a bath. When it is warm, we go in and wash, so how can we choose the Xingxing Yuba?Buying Yuba who goes home also needs maintenance and cleanliness. Let ’s take a look at these knowledge with Xiaobian.
How to buy the bathoba correctly
1. When choosing a product, we must first know the space conditions of the bathroom, and for the small area bathroom, then because the water mist is large, it is recommended to buy a bath with good air replacement effect.A novel top -sucking bath.
2. Next, say that the installation height, but the use of materials, production technology, etc. are all reference factors that cannot be ignored. Of course, when buying, we have a good cost -effective price / performance ratio.Products with more secure purchases are also a key point in the final after -sales. Do not underestimate.
The maintenance of the wind warm yuka
1. Pay attention to the thickness of Yuba should not be too large.
On the installation issue, consumers must pay attention to the thickness of Yuba when buying, generally about 20 cm.Because Yuba is going to be installed on the roof. If you want to put the yuk on the roof below the roof, it is the PVC ceiling or an integrated ceiling we often callIn the middle of the two tops, if the bath is too thick, the decoration will be difficult.
2. The bath system should be standardized.
The power of Yuba can reach up to 1100W. Therefore, the power wiring of Yuba must be a waterproof line, and it is best to do not low 1mm multi -copper core wires.There must be no light line settings. The Yuba power control switch must be a qualified product with waterproof 10A capacity, especially the old house bathroom installation of Yuba should pay more attention to the specifications.
3. Install the bath at the center of the bathroom.
Or the position of the bathtub slightly, so that it is safe and the function can be played to the greatest extent.
4. Avoid frequent switching and vibration around.
Usually use it to switch the Yuba frequently. Do not have a large vibration around the Yuba operation, otherwise it will affect the service life of the warm bubble.If abnormal conditions occur during operation, you should stop using it, and you must not dismantle the royal maintenance by yourself. You must have a professional and technical personnel in the after -sales service and maintenance department for maintenance.
5. Water spray is prohibited when bathing.
When using it, you should pay special attention: Although the current Yuba is waterproof, it must not be poured with water in actual use. Although the waterproof light bulb of the Yuba has waterproof performance, the metal accessories in the body cannot do this.That is, the metal in the body is still conductive. If it is splashed with water, it will cause danger of short circuit of power supply.
6. Keep the bathroom clean and dry.
After taking a bath, dont turn off the bath immediately, wait for the tide of the bathroom to be discharged and then shut down; usually keep the bathroom ventilated, clean and dry to extend the life of the bath.
Cleaning of Wind Warm Cither
1. Long -term use of Yuba, the switch panel is stained with stains. When cleaning up these stains, the power supply (zero line and phase line) should be cut off first, and when confirming that there is no electricity, take it down one by one in the bathbow.Wipe with a rag with a small amount of neutral cleaner. After the stains are wiped off, dry it with a clean dry cloth.
2. Pick off the pull spring, there are 4 spring on the four corners of the Yuba box, and you need to pick it off.And use a neutral disinfectant or cleaning agent to wipe the surface of the Yuba and the surface of the bulb. These are finished, and the inside of the chassis must be cleaned. Although the case is fixed on the roof, in order to ensure the YubasThe service life still needs to be completely cleaned.

Related tags： news