Author: dry handic
Dry handiches are a sanitary ware appliance with drying hands or drying hands in the bathroom. It is divided into sensor automatic dry hand and manual dry hand.It is mainly used in hotels, restaurants, scientific research institutions, hospitals, public entertainment venues, and bathrooms of each family.Dry handiches have overcome the shortcomings of existing dry handicons that can not make the wind in many directions to make the skins skin temperature too high. It aims to provide a dry hand with a cycle in multiple directions.There is a blank device, which has a wind guide film on the air guide device. Through the rotation of the air guide or the switching of the aircraft guide, the dry hand cycle is irresiably turned towards the wind.
Dry -handwing guidelines
When buying an automatic sensing high -speed drying mobile phone, do not just look at the price of the dry phone itself. Although some dry mobile phones are very cheap, it is difficult to control the consumption of consumption as a tiger.It is better to buy a good time or energy.Try to buy it after trying. Many small dry mobile phone manufacturers use dry mobile phones made by inferior materials. After a long period of continuous use, shell deformation occurs, with serious fire hazards.Food manufacturers should decide which type of dry mobile phone to buy according to their own needs and environmental factors; because there are many people in the food processing plant, they are not allowed to queue up to wait for dry hands before entering the clean workshop.Essence
1. Shell: The shell material not only determines the appearance of the dry mobile phone, but the unqualified materials may become a hidden fire hazard. The better dry mobile phone cases usually use stainless steel, stainless steel spray paint, and engineering plastics (ABS).
It is recommended that the food industry color selection 304 stainless steel, or a dry mobile phone with ABS engineering plastic.
2. Weight: If you need to consider whether the installation location and material have enough ability to withstand the weight of automatic dry mobile phones, for example: cement brick walls can generally do not consider weight problems, but if it is color steel plate, gypsum board and other materialsIn terms of ability, color steel plates usually follow the opinions of color steel plate manufacturers, or provide test data reference for dry mobile manufacturers.
3. Color: The color of dry mobile phones is relatively rich. Generally, white and stainless steel are the best choice for food factories. If you must consider environmental factors, stainless steel paint is also a good choice.
4. Starting principle: manually fixed -time switch, infrared induction, light blocking induction method.The latter two are non -contact induction. It is recommended that the food plant adopts the latter two starting methods to dry mobile phones, which can effectively avoid cross -infection.
5. Installation method: bracket installation, wall -hung installation, and can be used directly on the desktop to use
(A) You can use bracket installation and wall -mounted installation.
Generally, the installation method of the bracket is the second choice when the wall cannot meet the installation conditions. In addition, it is adopted under the unique requirements of the wall of the wall.The bracket installation is flexible and easy to use.
(b) Most of the cases are recommended to be installed on the wall, which is so stable and durable.
(C) The dry phone directly placed on the desktop has this characteristic. It is placed on the desktop for easy management. When used, it can be placed on the location (DH2630T, HS-8515C and other dry handicons can be used like this).)
6. Work noise: the smaller the better the condition that can meet the speed of the hand.
7. Running power:: The lower it can meet the speed of dry hand and maintain comfort.
8. Dry time: the shorter the better, it is best to be within 10 seconds (basically the same time with the use of hand paper).
9. The current of the machine: the smaller the better.
10. Wind temperature: Generally, it is more appropriate to choose dry mobile phones with wind temperature between 35 degrees Celsius and 45 degrees Celsius. It is neither waste of electricity nor uncomfortable
Analysis of dry handiche
When buying dry hand, consumers should decide which dry hand to buy according to their needs and environment.PTC -type dry handiches are different from the electric wire -shaped dry hand.Consumers can also choose dry hand -type dry -type dry -type dry -type dry -type dry hand, or heat -based hot -type dry -type dry handiches with wind -based calories.When choosing an electromagnetic induction dry hand, you should pay attention to this dry handicapyticon being affected by the environment and items.Pay attention to selecting infrared induced dry -type dry hand. Infrared sensor -based dry handiches are also susceptible to light interference. Consumers need to conduct a test machine when buying, and select dry hand that is not vulnerable to interference.You should also pay attention to which form of the electric motor used by the dry hand.There are many forms for dried -handed motors, including capacitive asynchronous motors, hood -type motors, string motors, DC motors, and permanent magnet motors.Capacitor asynchronous motors, hood -type motor, and DC motor -driven dry hand has the advantages of low noise, while the string motor and the dry hand of the permanent magnet motor have the advantages of large air volume.With the above characteristics, small noise and large air volume have become the best choice for dry hand now.
First, the dry hand with fast hand and environmental protection and energy -saving is mainly dry handicon.This kind of dry hand is characterized by high wind speed, which quickly blows off the water on the hand, and the heating function is only to maintain the comfort of the hand. Generally, the wind temperature is usually between 35-40 degrees.While fasting, there will be no burns.
Second, the main parameters of dry hand:
1. The shell, the shell material not only determines the appearance of the dry hand, but the unqualified material may become a hidden danger of fire. The better dry hand shells usually use ABS flame -retardant plastic, metal paint, and engineering plastics.
2. The weight, mainly to consider whether the installation location and the material have enough ability to withstand the weight of the dry hand, for example: the cement brick wall can generally not consider the weight problem.Steel plates and other materials must consider load -bearing capacity, but some manufacturers provide brackets to solve such problems.
3. Color, color is mainly the problem of the combination of personal preferences and the overall environment, and there is a dry hand that chooses the original color of the material as much as possible in food factories, pharmaceutical factories, etc., because the dry hand of paint may be volatile, which will affect food or medicines.Safety.
4. The launching method is usually two ways: manual and infrared induction. The new type of starting method is optical, which is characterized by fast startup and not easy to be affected by the environment.Started by blocking the amount of light, thereby preventing the problem of infrared dry hand. It also does not need to touch the dry hand, thereby preventing cross -infection.
5. Sensing position, you can choose according to your needs
6. Working method, hanging walls, brackets, according to your own needs, it is recommended to use bracket types frequently
7. Work noise, usually smaller the better
8. Do your hands, the shorter the better
9. The current, the smaller the better
10. Wind temperature, depending on the type of your own and choosing a dry hand, usually choose to run for a long time without burns.

Related tags： news