The extrusion plate is a plate made of continuous and uniform surface layer and closed honeycomb structure created by the polystyrene resin and other additives. The thick plates of these honeycomb structures will not occur at all.The structure of the structure can have different pressures (150-500kPa) at the same time with the same low-value thermal conductivity (only 0.028W/m.k) and the long-lasting excellent temperature-keeping and compressive resistance. The pressure resistance can reach 220-500kPaEssence
Squeeze plate construction process
Wipe the plastering of the plaster: 1. After the plaster mortar and paste mesh are frozen, the noodles can be brushed;Make it uniform; 3. Wipe the plastering plaster on the wall 2㎜, and requires the surface to be flat, smooth, yin and yang horn, straight, non -mesh exposure, flatness ≤4, verticality ≤4.
Is the extrusion plate toxic?
The main raw material of the extrusion plate is polystyrene (PS). Polystyrene is used to make past foam fast -food boxes. Even some plastic water cups are made of polystyrene., So the squeezing plate is non -toxic!
Squeeze plate price
1. Class B extrusion plate (insulation), the product material is polypropylene, the price of 0.035 at 0.035 is 340-366 yuan/cubic meter 2. A-level extrusion plate (fire prevention), the product material is EPS, the heating coefficient is 0.049-The price of 0.051 is 650-660 yuan/cubic meter. 3. Squeeze plate (insulation). The product material is polystyrene. The price of 0.035 is 370-380 yuan/cubic meter.The material is EPS, the price of 0.035 is 390-400 yuan/cubic meter
Extrusion board specification
The difference between extrusion board and polystyrazen board
The full name of the extrusion plate is squeezing polystyrene foam board, and its other name is XPS board.Polybine is also a plastic foam plate, which is also known as benzene board, EPS.If the thickness of EPS and XPS is the same, their thermal insulation performance is different. Relatively speaking, the insulation performance of XPS will be better.In the same way, if they have the same thermal insulation effect, the thickness of the XPS board will be thinner.But the price of the XPS board will be more expensive.The strength of the XPS board is kept within the range of 200kPa and 250kPa, and the strength of the EPS board is below 100kPa. For houses in some coastal areas, the strength of the roof is very important.And during the installation process, after the installation is completed, further reinforcement and assistance need to be performed.

Related tags： news