HOME > NEWSarticle

What are the specifications of thouter wall rock board? 2024-07-15 10:40:42 internet

The outer wall rock wool board is also called the exterior wall insulation rock wool board. The raw material of the outer wall rock wool plate of the outer wall of Shandong Horizon Building Energy Conservation Technology Co., Ltd. is a variety of natural rocks.Inorganic fiber, add special adhesives and dust oil at the same time, and then heated and solidified to generate the outer wall rock scaller we use!
Exterior wall rock wool board density
The exterior wall insulation rock wool plate is the specific name of the outer wall rock wool plate.It is generally 100kg/m3 as the density of insulating rock wool plates. This is a standard density for scientific proof that it is more suitable for the heating rock panel of the exterior wall of the building.In addition, rock wool boards are widely used in many areas of shipbuilding, petroleum, metallurgy, electricity, etc., which requires industrial equipment, which shows its important position in the industrial field.The content we have to discuss here is its application in the construction field.
Outer wall rock wool board specification
1. Pay attention to rainproof and do not construction on rainy days.
2. Increase the moisture -proof layer. Under the condition of special low temperature, the heating of the rock wool without resin is used. The moisture -proof layer must also be fireproof.
3. When the temperature exceeds a certain temperature, for example: when you are 200 ° C, the insulation must be appropriate to protect it, so that the thickness and capacity of the rock wool plate will not change.
4. Regarding the heating of rock wool products for large diameter and peace wall equipment. When surpassing 200 ° C, be sure to remember the instructions of rock wool board manufacturers: adding insulation nails, (about 400mm spacing) External protection should be tight.
Outer wall rock wool board specification
The specifications of the exterior wall rock scaller are generally used in the industry: the size is 1000 × 630 (mm), the thickness is 30-100 (mm), and the capacity weighs 60-150kg/m3.This is the most common and most commonly used specifications. Of course, it does not rule out that there are special needs. At this time, you can contact the manufacturer to customize the specifications they need.
Outer wall rock wool board construction process
1. The surface of the grassroots should be kept clean. There is no dirt, soil, coatings, etc., and it must also be solid and flat to remove places where drums, raised, and pollutants are eliminated.2. Put the noodle or adhesive dried powder into an appropriate amount of water and stir with a special electric mixer until the required viscosity.The amount of each formulation should not be too much, and it is determined to be used in the prescribed time.3. Check whether the rock pans are flat and dry.
Outer wall rock wool board price
For Taobao buying of the outer wall rock board, in addition to the material of the outer wall rock scaller, everyone usually buys an outer wall rock scaller that is suitable for their home.In the use of general families, Xuanwu Rock should be used as the main raw materials, international cotton processes, and advanced processes.The household specifications of the rock wool board are appropriate to choose from 1000*600, 1200*600, 1000*630, 1200*630 mm, with a thickness of 50-100 mm.The price of this exterior wall rock wool board is 302 yuan/cubic meter.

Related tags: news