The PVC plastic board uses a high -strength, high -transparent plastic board produced by high -grade imports and auxiliary materials.The color of the product is white, gem orchid, tea color, brown and other varieties.
PVC plastic board specification
PVC plastic board welding
1. When welding the PVC plastic board, it should be pasted from the cross line, and the back is facing up, and a glue should be painted with a brush to the ground.The child is compacted, and then perform the paving and tweets of the second board, and it will be carried out in turn.2. Discriminate waxing in the welded PVC plastic plate, and then welded after drying. The gap between the seams must be horizontal and vertical.
PVC plastic board processing
PVC resin is the main component in the formula. The level of molecular weight and the distribution of molecular weight on their performance: The impact of molecular weight: A. Increases with molecular weight, increased gravity and tangling degree between molecular chains, increased glass temperature increases, The mechanical performance of the product has increased as follows; B. Increases the molecular weight, the melting viscosity increases, the fluidity becomes poor, and the impact of the molecular distribution of the molecular weight is increased: A. The molecular distribution is too wide, which indicates that there are a certain number of molecular molecularities.The molecular weight is low and high, and the mechanical properties of the product are reduced before, and the processing difficulties will easily lead to difficulty in the appearance of the product.
PVC plastic board installation
(1) Installing plastic decorative boards, generally adhesive fixing method, press fixing method, nail fixing method, and plastic flower fixation method.(2) Paste the fixing method is often used for the installation method of the plastic decorative plate fixed on the wooden keel as a skeleton or the top surface of the concrete, and the top surface of the lime powder brush.If it is fixed on the keel skeleton, the plastic decorative board should be pasted after the keel is installed, and the plastic decorative board can be pasted after the inspection meets the requirements.Found.Before installation, the size of the vertical and horizontal segmentation line on the size and seam width of the joints on the keel or the top surface is installed.Calcium plastic foam sound -absorbing boards generally have flying edges. Before installation, a steel mold frame or wood mold box should be made. The calcium plastic foam plate should be put in it. The cutting is cut into the same size and neat edges.The same room should be paved or pasted with the same thickness plate.
PVC plastic board price
The PVC gussetting is almost 15-16 yuan/m2, which is better than 30, and the wooden shelf is about 4-5 yuan/m2.
Related tags: news