A processing method of the fire burning plate is the granite. First, the natural granite is sawn into a plate. The surface of the board passes through the first grinding, placed on a fixed rack after the first grind, and then the surface of the first grind is sprayed.It is characterized by the flame spray use of acetylene, oxygen, and spray gun, and the flames move evenly on the plate surface.
Fire burning board construction process
1. Clean the grassroots: Clean the ash and debris on the surface of the concrete layer (water stabilization layer).If the local unevenness is uneven, the convex should be flattened, and the concave places should be flattened.2. Find flat and bomb line: The high label high and the plane axis in the design drawing elevation control point.Contrast every 8M separation seam of the cushion (cleaning the seam with hemp asphalt with Msolia asphalt) began to spread. First, lay a benchmark stone on each corner according to the location and high range.Put a benchmark stone each.After the measurement and inspection, after the elevation and position are correct, a large area is paved.3. Try and trial: Before laying, you can try to try each stone before laying.After trying hard, arrange the number in two directions, and then discharge neatly according to the number.To check the gap between the sector, the location of the plate is consistent with the design drawings.Before the formal paving, a trial is required.
Burning board specification
Burning board price
At present, the market is usually about 200-300 yuan a square meter. The quality is better, the price will be relatively expensive, the price is different, the price is relatively different, and the brand is relatively important.Your choice.
What is the burning board
The fire burning plate is burned by liquefied gas and oxygen on the surface of the granite. Due to the different heating and uneven expansion, it forms a little bit convex like a litchi surface and has anti -slip effects.
Related tags: news