The toilet belongs to a sanitary appliance in the field of water supply and drainage materials.The main technical characteristics of this practical new type of toilet is that: open the upper part of the existing toilet S -shaped water curve, install a cleaning embolism, similar to installing an inspection port on the drainage pipe or cleaned the blocker.After the blockage, the user can use this cleaning embolism to clear the blocked objects quickly, quickly, and sanitaryly, and it is economical and practical.So what are the advantages and disadvantages of the toilet?What are the categories!Take a look together
Some characteristics of smart toilet
Intelligent toilet originated in the United States for medical and elderly health care. It was originally set with warm water washing function.Later, after South Korea, the Japanese bathroom company gradually introduced technology to start manufacturing, and added a variety of functions such as heating, warm water washing, drying the warm wind, and sterilizing.At present, the smart toilet on the market is generally divided into three types, one is a smart toilet with cleaning, heating, sterilization, etc., a smart toilet that can be automatically replaced, and the other is automatic switching and cleaning cleaning.Functional smart seat.
What are the categories of toilet
The toilet can be divided into two types: toilet toilet and a conjoined toilet. Generally, the split toilet occupies a larger space, and the space occupied by the conjoined toilet is smaller.In addition, the shape of the toilet should be more traditional and the price is relatively cheap. The conjoined toilet should look novel and high -end, and the price is relatively high.
Outlet classification
The outlet is divided into drainage, (also known as bottom) and horizontal drainage (also known as the back row).The horizontal drainage outlet is on the ground. When used, a section of rubber tube should be connected with a toilet.The bottom drainage port, commonly known as floor drain, is just the right drainage outlet of the toilet with it when used.
Drainage method classification
The toilet can be divided into "straight rush" and "rainbow suction" by pressing the water.
Some advantages and disadvantages of the toilet
The conjoined toilet shape is modern, the water tank is relatively low, and the water is slightly more water, and the price is generally higher.The conjoined body is generally siphon -type water, and the flushing is mute. Because the water tank is burned together in the main body, it is easy to burn, so the finished product rate is low.Due to the low water level of the courses, the pits of the general courses are short, so as to increase the rushing power.The conjoined body is not limited by the pits, as long as it is less than the housing pit distance.
Wall
Because the water tank is embedded, the water tank is embedded, and the quality requirements are very high (it cant be repaired), and the price is also the most expensive.The advantage is that it does not take up space, the shape is more fashionable, and it is used a lot abroad.For the dark water tank belonging to the toilet, in general, the conjoined, split, and dark installed water tank does not have that water tank that is easy to break. The absolute factor is that the water tank accessories are bad and bad, and it is the bad of rubber pads.
Classified according to the principle of water flushing in the toilet, the toilet on the market is basically two categories: straight -ruming and siphon type.The siphon type is also divided into vortex siphon and spraying siphon.Their advantages and disadvantages are as follows:
Straight
The straight -type toilet uses the flushing of water to discharge stools. Generally, the wall of the pool is steeper and the water stored area is small. In this way, the hydraulic concentration is increased.
Advantages: The straight water pipe road of the straight toilet is simple, the path is short, and the diameter of the pipe is thick (generally 9 to 10 cm in diameter). Using the gravity acceleration of water can be cleaned.In terms of pollution capacity, the straight toilet does not return to the water bend to take a straight rush, which is easy to rush down the larger dirt. It is not easy to cause blockage during the scouring process. There is no need to prepare paper baskets in the bathroom.In terms of water saving, it is also better than the siphon -type toilet.
Disadvantages: The biggest defect of a direct toilet is the sound of flushing, and because of the small amount of water, it is prone to scaling, and the deodorant function is not as good as a siphon toilet.There are fewer, the choice is not as large as the siphon toilet.
Siphon
The structure of the siphon -type toilet is that the drainage pipe is "∽". After the drainage pipe is full of water, a certain water level will be generated.Was the risk for whether the water flow is large, so the water surface of the pool is large, and the noise noise is small.The siphon -type toilet is also divided into two types: vortex siphon and spraying siphon.
Related tags: news