Author: sensory faucet
Sensing faucet, a smart faucet design, has gradually entered the publics life in recent years.Its core function is that without direct contact with the human body, it can achieve the purpose of controlling water flow. The realization of this function not only reduces the risk of cross -infection of bacteria, but also improves the efficiency of water resources.Next, lets explore the principles, types and precautions of the faucet.
What is the type of sensor water faucet
The type of induction water faucet is mainly divided into two types: one is infrared induction water faucet, and the other is a capacitive induction water faucet.The infrared sensor water faucet is to detect the existence of user hands by launching and receiving infrared light, while the capacitive induction water faucet is achieved by detecting the electric field changes caused by the users hand.Although the working methods of the two are slightly different, they can achieve the same effect.
While using the faucet, we also need to pay attention to some matters.First of all, the use environment of sensor faucet cannot be too humid, otherwise it may affect the normal work of the sensor.Secondly, induced water faucets should avoid contact with corrosive substances such as strong acids and strong alkali during use, and prevent damage to the faucet.Finally, for users with sensitive electromagnetic radiation, it is recommended to choose infrared sensor faucets because its radiation is relatively small.
The emergence of sensor water faucets is undoubtedly the convenience of life development to us.However, we should also pay attention to that any technical products are universal, they have both advantages and limitations.For example, although the sensor faucet can achieve no contact operation, it requires power -driven, and it cannot be used once the power failure is encountered.In addition, the cost of induction faucet is higher than the traditional faucet, which is also a factor that we need to consider when choosing.
Principles of sensor water faucet
The working principle of induced water faucet is not complicated.It detects the existence of the hand through the built -in infrared sensor.When the sensor is close to the sensor below the faucet, the sensor will receive changes in infrared signals and immediately send a telegram signal to the control system.After receiving the signal, the control system will quickly start the internal solenoid valve or motor, so as to open the faucet and make the water flow smoothly.
The key to this intelligent device can accurately respond to the needs of users needs is its internal complex control system.The control system of inductive water faucet usually contains microprocessors, solenoid valves, and related circuit components.The microprocessor is the core of the entire system. It is responsible for analyzing the signal sent by the infrared sensor, and judge according to the preset program to control the opening and closing state of the solenoid valve.
In addition to the basic switching function, some advanced sensing water faucets also have the function of temperature control or even flow adjustment.These functions make the sensor faucet more fit the users personalized needs.For example, users can choose hot and cold water by touching different sensors, or adjust the flow to meet different usage scenarios.
In terms of use, induced water faucets have greatly reduced the risk of cross -infection because they do not need to contact, especially in public places such as hospitals, schools, and office buildings. This characteristic is particularly important.At the same time, due to frequent rotation handles, inductive water faucet also reduces mechanical wear and prolongs the service life.

Related tags： news