With the acceleration of the pace of video surveillance and the rapid development of high -tech, the whole society has put forward higher requirements for online digital video information management, and the construction of a comprehensive monitoring comprehensive management system has become the best solution.So what is the method of network monitoring camera installation?Lets take a look at it together.
Network monitoring camera installation step 3: The needs of the lighting environment
The limit of bandwidth has always been one of the important reasons for network monitoring difficulty.It is precisely because of this factor that the long -term differentiation of online users has been differentiated.Powerful use of self -built networks, and users without strength can either only tolerate slow transmission, or find another way.
However, with the continuous improvement of compression technology and the optimization of the network environment.The living environment of network monitoring has also improved.However, if you want to realize that ordinary public network users can better complete network monitoring, a advanced performance terminal is obviously indispensable.
In terms of system performance, we should try to use currently the most advanced processing systems such as Linux or Win7, and have advanced CPUs, relatively large -capacity memory and graphics cards, so that our equipment can play the effect of imaging more comprehensivelyEssence
In addition, if there are other auxiliary alarm facilities in our system, pay attention to their compatibility with the system, and focus on the stability of the equipment itself in the current environment. It is also what we need to focus on and debug when setting up equipment.
Network monitoring camera installation step 2: Capment requirements of cameras
When using a monitoring camera at night, in order to avoid reflection and shadows, lighting equipment is usually required. You can use infrared lighting instead of ordinary light bulbs.However, users must use black and white monitoring cameras and network monitoring image server with infrared lighting equipment, because black and white monitoring cameras are more sensitive to infrared light sensitivity, while color monitoring cameras cannot play infrared function.
Today, many cameras have begun to use broad dynamic functions to improve their imaging ability in the backlight environment.However, this does not mean that the camera can continue to complete the work in a strong light environment.Because under the shining of strong light, the direct light of the light can easily cause the camera to be difficult to normalize and accurate images, which eventually causes the color filter on the sensor chip to permanently decolor, making the camera appear stripes in monitoring images.Therefore, if we can, we can make the camera in a smooth mode as possible, but in any case, we must avoid the direct stimulation of the camera lens for a long time.
Network monitoring camera installation step 1: Position requirements of cameras
For network cameras, its line setting method is obviously richer than traditional simulation equipment.However, no matter what kind of transmission method is adopted, interference is one of the issues we have to pay attention to.Especially for the video signals of wired transmission, the same direction of signal lines and high -power wires is undoubtedly a taboo in the process of wire, and the two should not be placed in the same transmission tube for the convenience of construction.
Even if it is limited by the environment, it is impossible to separate the two, and it is necessary to ensure that at least half a meter distance.Only such a plan can better avoid the effect of strong magnetic interference on video transmission.For equipment using wireless signal transmission, although there are fewer restrictions on lines.However, the camera itself should avoid the source of strong magnetic interference around the surrounding area.At the same time, ensure the insulation isolation of the camera from the ground.In addition, we should also pay attention to avoiding the impact and obstacles of the line on the work of the pair.
What is network monitoring camera
For monitoring the camera, the quality of the location is directly related to the imaging effect of the device.Therefore, many users regard the monitoring effect as the primary reference for monitoring the installation position of the camera.However, they ignore a very important point: monitoring the camera is not universal. In the choice of installation, it also has its own requirements.
The first is in the installation location. In order to make the camera avoid interference from the surrounding environment and achieve a better camera and survival effect.When installing the indoor environment, we must ensure that the height of the equipment is not less than 2.5 meters, and in the outdoor environment, we must also put the monitoring equipment at a height of more than 3 meters from the ground.Otherwise, no matter from the self -protection of the camera or the perspective of equipment monitoring, there will be many negative effects.Only after considering these basic problems, the angle is the aspect we consider.

Related tags： news