The water tank floating ball valve is relieved by the rotating valve core to make the valve unblocked or blocked.The ball valve switch is lightweight, the volume is small, which can be made into a large caliber. It can be made in a large caliber. It is reliable, simple in structure, convenient for maintenance. The sealing surface and the sphere are often closed, which is not easy to be eroded by the media. It is widely used in various industries.
Principle of water tank floating ball valve
The structure of the floating ball valve is simple, and the working principle is easy to understand. The floating ball valve is actually equivalent to a switch valve. The upper part of the switch valve has a leverage. The end of the lever is connected to a certain place of the valve.Floating ball.When the digital drop in the water tank decreases, the floating ball will decrease with the decreased water level, and the decline of the floating ball will drive the piston in the valve through the connecting rod.It will flow into the water tank from this vacancy, the water level of the water tank will gradually rise, and the floating ball will rise again with the water level. After reaching a certain height, the power generated by the rising floating ball will push the piston in the valve body through the link.There is a well -sealed rubber pad. When the intensity reaches a certain degree, the vacancy between the piston and the valve will be tightly sealed. At this time, the tap water cannot enter the water tank.
Water tank floating ball valve price
Fully automatic water level control valve 4 -point water tower water tank floating ball floating ball valve second -generation stainless steel plastic valve water switch price is 28 yuan stainless steel floating ball valve water tank water tank floating ball switch DN15/20/25/32/40/50 floating ball valve price 40 yuan is 40 yuan
Water tank floating ball valve installation
1. Remove the protective cap on both sides of the Fanglan side of the remote control floating ball, and rinse and clean it when the valve is fully opened.2. The pipeline near the installation point must not have a low or endless force. You can use a pipeline stent or a support to eliminate the deviation of the pipeline.3. Before installing the remote control floating ball valve, the whole machine should be tested according to the specified signals, electric or pneumatic to prevent the use of vibration due to transportation, and can be installed on the line after passing.4. The remote control floating ball valve should be installed in the horizontal or vertical direction of the pipeline.

Related tags： news