Anti -theft screws, also known as anti -demolition screws, use anti -theft screws in major businesses in todays society to protect their own interests.The anti -theft screws are widely used, such as power facilities, railway facilities, highway facilities, oilfield facilities, urban lighting street light facilities, light car tires and public fitness equipment.The product performance is superior, and has received widespread attention and praise from various industries in society.
Anti -theft screw price
Anti -theft screws are generally used on car tires and guardrails, so the price of anti -theft screws is different because of this use.The price of anti-theft screws used for guardrails is relatively cheap, and the price is generally 0.2 yuan -1 yuan/piece.The anti -theft screws on the car tires are different. Due to the car, the more expensive the corresponding anti -theft screws, the more expensive the car.It is a cheaper at 30 yuan -50 yuan//, while more expensive may be more than 100 yuan.
Anti -theft screw installation
The first step needs to prepare the license plate, and then penetrate the screws according to the eye on the scheduled license.The second step is to tighten the screws with the screwdriver to ensure that several screws can be attached to the license plate steadily.The third step needs to add and fix the screw cover. This step is a key step. For anti -theft screws, the anti -theft screw cover is the core part of the entire anti -theft screw and the most critical link.When everything is already good, check whether each lid is very strong, and after checking, the installation of the entire anti -theft screw is finished.
What to do if the anti -theft screw is lost
Find a sleeve wrench that is appropriate (just on the anti -theft nut) head, find two cement steel nails into the gap between anti -theft nuts and sleeve wounds, and tighten the sleeve wrench.You can write down the nut.Be sure to use steel nails to reduce the head of the steel nail. Try the thickness of the steel nails.
How to disassemble anti -theft screws
1. First of all, clean the surface of the screws, especially the rusty places to facilitate the next disassembly.The anti -theft screw cover issued by the vehicle management is generally steel, and it is generally difficult to pry down.2. Find a small screwdriver and poke to the screw cover. It mainly has the position of the bayonet to do the bayonet, but it depends on luck.After entering the gaps of pine, pry the lid down slightly, and you can pry down the lid.3. Use a word screwdriver to pry open, then use an electric drill, turn a hole on the screw cover, and then grip the hole with a pliers, and then stretch the cross screw knife into the hole.Essence

Related tags： news