Wooden, (commonly known as: wooden leather, single board; English: veneer; hereinafter referred to as Bo Mu) and its veneer decoration industry started in the 1950s, and after half a century of development, it has a considerable scale.Especially in the past two decades, with the jumping growth of my countrys furniture manufacturing and decoration industries, its development has made rapid progress, and a large number of industry experts have emerged.
Machining
In the rotation cut, put a whole log into the mold on the lathe and rotate according to the rotation of the blade.If the log is not rolled, the rotation is cut or the peeling of a log can be continuously performed.This is a very affordable method of cutting. This kind of wooden skin produces a variety of textures based on the annual wheel of wooden growth and fibers at different levels.The width of the rotating wooden skin is very large, and a whole panel can be processed. However, this cutting method causes some less symmetrical texture because of the discontinuity of texture.
Wooden skin thickness
The thin wood is classified by thickness, and the thickness is greater than 0.5.Classified by the manufacturing method, it can be divided into thin wood; cutting thin wood; cutting thin wood; semi -circular rotation thin wood.Usually, the planing cut method is made more.Classified according to the form, it can be divided into natural thin wood; dyeing thin wood; combination of thin wood (technology wooden skin); splicing thin wood; forming rolls of thin wood (non -woven cloth thin wood).Classified by the source, divided into domestic thin wood; imported thin wood.
How to post wooden leather
First wipe the wooden skin with a wet towel soaked in warm water to make the wooden skin moist, put it for a minute or two, let it absorb the water uniform, then the density plate is put on white latex, stick it with wooden skin, and scrape it with a scraper.If there are still uneven situations, you can brush a layer of white latex diluted solution on the sticky wooden leather. After the excess white latex is scraped out and is squeezed out, you can use the wet wet towel gently.Can.If the wooden skin is not properly wet, when it encounters white milk, the rubber wood will be upset after absorbing water.Swipe a layer of glue on the wooden skin, and then brush the acceleration side to the glue. After waiting for a few minutes, press the wooden leather to put it on the post on both sides.
Wooden price
Reference price: 24 yuan/square meter.Wooden began in the 1950s and developed a considerable scale after half a century.Especially in the past two decades, with the jumping growth of my countrys furniture manufacturing and decoration industries, its development has made rapid progress, and a large number of industry experts have emerged.
Type
1. Walnut.Walnut is mainly produced in North America and Europe. The color of walnuts is mainly purple with dark brown.The texture of the cut surface is large mountain pattern, the wood is high -quality, and the price is relatively high.2. Water song willow.Shui Qu Liu Sheng is produced in the northeast and North China region of my country. The color of the water song willow is mainly yellow -brown to gray and yellow -brown. Noodles are sometimes like sheep roll -like texture.3. Cherry wood.Cherry wood is mainly produced in North America and Europe. The color of cherry wood is mainly light yellow -brown. The cut surface of the string is like medium -sized parabolic lines, and small circles are interspersed in the middle. The texture is very elegant.At the same time, cherry wood is a high -end wood.4. Maple.Maple is widely distributed. It is rich in North America, Europe, Africa, Asia and other places. The color of the maple is mainly shallow yellow. The cut surface has a hill pattern and a shadow.5. Teak.Teak is a kind of tropical tree species. The place of origin is Myanmar and Thailand. Teak has corrosion resistance, good waxability, and sufficient oily. Therefore, it is recognized by the world as one of the precious trees.

Related tags： news