The role of the anti -electrical wall adopts the "separation of electric wall" technology can not only block the possibility of leakage that may generate the electric water heater itself, but also block the safety threat caused by the shower due to the ground wires or water pipes.Therefore, the water heater adopts the "partitioned wall" technology to fully guarantee the safety of the peoples bathing.
Electricity wall price
If you buy an electrical wall now, it is divided into two types. The first is within the electric water heater, such as buying an electric water heater, but this water heater has the function of the anti -electrical wall system. Such the price is very wide, some are unknownThe brand is not mentioned for the time being. From the brand sorting, the price is about 1800-2500 yuan in the low-end.Some high -end prices are more than 3,000 yuan, brands such as Smith, Midea, etc. These can be checked according to their own budgets and need to go to various shopping websites. There will be very detailed screening, but some suggestions here are ordinary families.It is enough to buy a low -end one, because the essence of an electrical wall is for safety. This is the most basic. No matter what price, it can be competent.Of course, everyones taste is different, so there are colorful choices.The second is to buy an inside electrical wall parts inside the electric water heater, according to the regional differences.There are differences between 20 yuan and 200 yuan, and of course there are differences in quality and brand.
What is the anti -electric wall
Electricity wall technology is the integration application of various technologies such as water heater pipeline design technology, raw material technology, and electrical damping technologies and inventing the water heater safety patented technology based on this. It mainly includes the following aspects: internal electrical antiThe selection and installation of the heating pipes, magnesium rods, thermostats and other components inside the water heater are special insulation treatment to ensure that the electricity in the water will not leak in the water;The hose is specially processed to ensure that it is insulated from contact with the human body.The pipelines of the pipeline anti -electrical water heater adopt the raw materials of the special formula on the material selection. The structural design of the pipeline is applied to the damping technology, even if the water band in the water heater can be guaranteed; it can ensure the safety of the bath.
Electricity wall installation
The anti -electrical wall is a kind of anti -electrical accessories. The real role is mainly installed on the electric water heater to play a certain role in electrical prevention.1. First fix the hanging panel, install the electric water heater on the fixed board to connect the ground line, the scorching line, and the fire line.The ground wire is connected to the floor line with yellow -green; the fire line is connected to the fire line of the leakage protector, and the color is brown -red; the zero line is connected with the leakage protector, and the color is blue -green.2. Installation outside the electric anti -electrical wall.After the water heater is installed, tighten the interface of the water outlet pipe outside the water heater, and then use the water outlet hose to connect the anti -electric wall exit.
Is the anti -electric wall useful?
It is useful. The electrical wall is also called the hydropower decaying method. The resistivity of the water dropped at 15 ° C is 1300Ω.cm, that is, as the height of the water increases, the resistance gradually increases.The other water in the water heater is separated to increase the length of the water column flowing through the water pipe to sufficiently long enough to make the section area of ??the water column be small enough.The current of electric shock damage.
Principle of Electricity Wall
"Electricity Wall" (that is, the water resistance decay isolation method) is the use of the resistance that the water itself has (such as the national standard regulations that tap water should be greater than 1300Ω.cm at 15 ° C).(Insulation material), the determination of the pipe diameter and distance forms the "partition wall".When the electric water heater work, even if there is electricity in the water, even if there is electricity, it will be quarantine by the water of the water itself through the "partition wall".Zero voltage and extremely weak current below 0.02mA/kW.

Related tags： news