What are the problems of Tissot mechanical watches when used? When the mechanical watch is used, the length of the swing is to reduce the length of the vertical wheel.The mechanical watch wheel is thinner, and the exposed steel wire is pressed on the right side ...
What are the problems when using the Tissot mechanical watch?
What are the problems of Tissot mechanical watches when used? When the mechanical watch is used, the length of the swing is to reduce the length of the vertical wheel.The mechanical watch wheel is thinner. In the case of not easy to round up, the exposed steel wire can be pressed on the ease of the positive ectopus.
Watch Knowledge: Tissot Watch Precautions
The front end of the wheels should not be exposed excessively after inserting the main splint hole (for the main splint hole) to avoid wiping with parts such as central wheels or box wheels.When the handle is pulled out of the needle position, a part of the wheel should still exist in the main clamp hole, otherwise the handle shaft will not only shake, but also destroy the matching of other parts of the parts.The diameter of the swing wheel should be slightly less than the diameter of the small round wheel of the main splint.
During the maintenance of the automatic mechanical watch, the length of the clutch wheel is determined.When making a mechanical watch, a square copper skin can be inlaid on the upper end of the round head, and the copper skin can be placed vertically on the springboard to assist in positioning.The more skilled watchmakers can directly use the four -petal paw gap between the head of the head as a positioning reference.It is more convenient to have a square-headed man with a tool for the use of the man with the tool. It is shown in Figure 5-16.The steps of the Fang Forest Section are shown in Figure 5-17.When it is made of this section, it is not allowed to rotate and move, and it is not allowed to rotate the pine in any side of the square segment to prevent the stitches of the handle of the watch.In order to make the swing wheels in a square, when the use force is uniform, the number of tadpoles can be similar to the number of times. It is advisable to try it with the clutch square hole, so that the clutch wheels of the mechanical watch can naturally be put into the mobile flexibility.
original:

Related tags： bags&jewelry