More and more families are equipped with cake making tools such as oven, baking machines, and the public more and more like to make baking and bread by themselves.Can save part of the job.What is the difference between the noodle and kneading machine?How to clean the noodles?
The difference between the noodle machine and the kneading machine
It is not the same machine as the noodle and kneading machine.
The noodle machine is a type of pasta machinery, which is mainly to mix flour and water evenly.There are vacuum and noodle and non -vacuum and facial machines.Divided into horizontal, vertical, single axis, double axis, half -axis, etc.
The kneading machine, a mechanized food machine with artificial kneading noodles, greatly reduces the labor intensity of kneading work.
How to maintain a kneading machine
1. Frequently check the fasteners of each component during use.
2. The gear meshing area of ??this machine uses lubricating fat and lubrication, refueling once every half a month. There is a powder metallurgical bearing tile in the bearing seat. Each shift must be injected twice to the oil cup on the bearing seat.
3. The amount of flour should not exceed the capacity of the noodle when the surface of the noodles, so as not to burn the motor.
4. If the dough is found, it should be repaired in time and replaced the oil seal.
5. After the machine is used, it should be cleaned in time to avoid being used again.
6. When cleaning, the height of the water in the noodles should not exceed the lowest point of the axis to prevent the water from overflowing or flowing into the side panel mezzanine from the axishole of the side barrel on the side barrel.
7. This machine is a tick -proofing appliance, which is forbidden to clean the water spray pipe.
How to maintain the noodles
1. Add an appropriate amount of lubricating oil to each oil hole or oil cup with the noodle machine and insist on adding 2-3 times per class.
2. Connect the power and check the rotation direction (the mixer turn backwards).
3. The operation should be stable and there is no abnormal noise.
4. After 30 minutes of the empty cars, review the solids and then work.
5. Both the gear deceleration transmission structure has the advantages of simple structure, compactness, convenient operation, no complex maintenance, long service life and other advantages.
6. Face fighting, stainless steel materials and special surface treatment, professional and facial machines meet hygiene standards, and noodle installation and debugging.
7. The machine should be flattened in all feet, and the multi -function and noodle machine should be reduced; the ground wire is connected at the bottom of the rack (equal potential wiring terminal) to prevent the danger of leakage prevention.
8. Check whether each fastener is loose and check whether the power cord switch is intact.
9. Add an appropriate amount of lubricating oil at the gear.

Related tags： Appliances