Electric iron is a tool for flat clothes and fabrics. The power is generally between 300-1000W.Its type can be divided into: ordinary type, temperature adjustment type, steam spray type, etc.Ordinary electric iron structures are simple, cheap, and convenient manufacturing and maintenance.
Electric iron cleaning method
1. Cut off the power after the electric iron is preheated to 100 ° C. Apply a small amount of soda or decontamina for the coking of the bottom plate. Wipe it back and forth with a clean cotton cloth to remove the dirt.
2. The stains on the iron surface. After the iron is heated, wipe it with the wet wet cloth.
3. If the water in the water tank of the spray -type electric iron tank is found, the white vinegar and the water can be injected into the water tank with half of the water and the water.After washing out the vinegar solution, it was washed several times.
4. If there is a white powder in the exhaust hole, use a needle to clear it.After cleaning, you must pour the remaining water in the water tank. If it is found, it is not clean. You can start the electric iron and use the excess water.
Precautions when using electric iron
Electric iron is a high -power electrical appliance.The matters should be noted when using an electric iron: 1. The power supply of the electric iron must be plugged in three phases, and there must be a ground or zero -protection device.
2. Because the electric iron is at least 300 watts of power, it is necessary to use a thick wire to connect the electric iron to ensure sufficient capacity.3. The home meter must have sufficient capacity. Generally, 300 watts of electric iron requires a 2.5 -by -electric meter, a 500 -watt electric iron needs to be equipped with a 3 -to -3 -to -electric meter.The iron should be equipped with a 10 -in -the -meter meter.
4. When using the interval, place an electric iron erected, or put it on the insulation material such as iron blocks and ceramics to avoid ignition the material.
5. When collecting, protect the electric iron connection to prevent the leakage from breaking.
6. Do not let the child get close to prevent the child from touching the burns.
7. After use, wait for the electric iron to be cooled naturally before you can collect it.
8 The steam electric iron has a drip switch on the front end of the handle. Press the drip to the iron board. When the temperature is high enough, the water evaporates into the steam from the bottom hole. The temperature of the iron plate is too low, and the water cannot evaporate.Press again to turn off the water and dont miss it.

Related tags： Appliances