The moldy of the bathroom is very common. I believe many people have such trouble.The moldy wall of the bathroom not only affects the beauty, but also may also breed a lot of bacteria on it.So how to remove mold spots in the bathroom wall? What should I do if the bathroom wall is moldy? Let me share the mold mold and anti -mildew counter measures for you, lets take a look together!
The cause of mold on the bathroom wall
In an environment that has been warm and humid for a long time, in the case of mold breeding and growing, the raw materials of organic and acrylics such as cellulose or acrylic in the wallpaper or wallpaper will mildew.Depending on the different types of mold types, it forms a piece of black, green, purple brown and other color molds. Generally, the distance between 40cm to the floor on the floor is existed. The formation and existence of these mold spots seriously affect the beauty of the environment.
Source of humid water on the wall:
1. Bathing and splashing water through the gap between the wall tiles.
2. Indoor water vapor spreads through the wall.
3. The embedded wall is damaged and leaked.
4. Damage to the ground waterproof layer can make the wall wet through the "capillary phenomenon".Among them, "damage to the ground waterproof layer" is the most common and most tricky in actual life.This article mainly discusses the wet and moldy governance of the wall skirts caused by this situation.
Mold treatment method of the bathroom wall
1. First use the shovel to remove the moldy position of the wall, and then use 108 glue to brush to the position just now. Then the putty is then used again, and finally it can be brushed directly with latex paint.If you do n’t know the steps of construction, you can ask a decoration master to help, and say these steps, and the other party knows how to do it.
2. The bathroom is generally more humid. If you can buy some desiccant and put it inside, then the humid situation can be greatly improved, and at the same time, the moldy situation can be relieved.
3. You can use the disinfection solution to the moldy position first, and then brush the bleach. If your bathroom wall is white, you can use this method.
4. If there is a leakage in the bathroom, it is best to check which water pipe leaks first, and then ask people to replace this water pipe until the water is not leaked, and the location of the wall should be prevented from seeping water.However, this situation is only applicable to the mold of the wall due to the leakage of the water pipe. If the wall is moldy caused by other reasons, other methods must be taken.
5. Usually keep the bathroom more in a good ventilation state, because if it is not ventilated, the mold will be more serious, and there should be an extra exhaust fan in the bathroom.
6. You can prepare a bucket of hot water first. It is best to boil the type. Then pour half a bottle of vinegar into this bucket of hot water, stir well, wet the towel, and then use this towel to start wiping the wall on the wall with this towel.The mildew, until the mold point is gone.
7. If it is not serious, just clean up the mold. Of course, the environment of the bathroom is already very humid. The growth conditions of the mold are air, nutrition, temperature, and humidity.In high humidity environments, molds are particularly easy to grow.Therefore, it is essential to clean up the mold spraying some mold.
Daily maintenance skills of bathroom exterior wallpaper
1. To prevent the mold of the wallpaper, the waterproof project in the bathroom must be done well.
2. The wall surface on the side of the bathroom is used to prevent waterproofing the wall with waterproof lotion before the tile is applied; after the tile is pasted, the seams of each tile are closed with glass glue.
3. The wall surface of the wallpaper should also be brushed first, and then the attachment is batch of putty and brushing the membrane to achieve everything.
4. The waterproof of the bathroom floor is also very important. The ground must be flat. The waterproof lotion must be in place evenly. The glass glue should be tightly closed at the seams such as the floor drain, the corner, and the pipeline.The easiest to exudes.In addition, the waterproof layer should be closed after finishing.

Related tags： Appliances