The shower device achieves water -saving effect by reducing traffic, extending service life, and quantitative water supply.The bathtub is more water -saving than using a bathtub, which is more in line with the concept of environmental protection.Showering is the first choice in public baths, locker rooms, etc.
Shower brand
Top Ten Brands of Shower Motor: Moen Moen Shower Top Ten Brands 2: Top Ten Brands of Hansgia Shower 3: Kohler Shower Top Ten Brands 4: HHSN Glory Shower Top Ten Brand 5: Henn CAE Shower ShowerTop Ten Brands of Instant: Top Ten Brands of Grand GROHE Shower Seven: Gauss Coso Shower Top Ten Brands Eight: Huayi Huayi Shower Top Ten Brands Nine: Nine Muo Jomoo Shower Top 10Brand Hansgia
Shower installation
I. The installation process of the shower device 1. After the size of the size, the tube filaments, lead oil, and tatling lines must be performed.On the mouth.2. When the shower is connected with the copper into the water inlet, tighten the nut by hand.Then remove the shower, hit a hole with a diameter of 40mm and 10mm deep, and cut the lead roll into the hole.3. Pay attention to the lead oil and pad to prevent rust oxidation. Use a wooden screw to fix the shower disc and wall surface.4. When installing the shower, the shower should be straightened, the discs are close to the wall, and the mark is drawn out.Tighten it, and finally fix the disk on the wall with a wooden screw.
Electric shower
You should grasp three points when selecting an electric shower device: at first glance, there is a leakage protector and a safe pressure network.Once trace leakage or temperature control failure occurs, these two devices will work automatically to ensure user safety.The second is to see if there is a qualified certificate, warranty card and nameplate logo.To understand product models, power, voltage, waterproof level, and so on.In order to prevent self -folding machines, many products are equipped with seals on the connection part of the machine. You should check whether the sealing of these key parts is destroyed when purchasing.
Shower choice
1. The mainstream shower materials of the shower device include plastic, stainless steel and copper. Relatively speaking, although the plastic shower is cheap, there are many disadvantages, incompatible, easy to accumulate bacteria and dirt, which does not meet modern timesPeople pursue the quality of life and health.The stainless steel no bronze shower is similar, but relatively speaking, the stainless steel shower is cheaper, while the copper shower device is more fashionable.2. The water outlet method of the shower is directly affecting the feeling of bathing.3. The water outlet of the self -cleaning effect of the shower is easier to clean. It is not easy to produce scale. It is usually easier to clean when bathing. It can be scrubbed by hand and cloth.
Electric shower
What should be paid attention to using an electric shower: 1. No matter what kind of electric water heater is used, a reliable ground wire must be installed before use, and the ground wire should be checked regularly. The ground resistance must not be greater than 0.1 ohm.2. When using a fast -heat electric water heater, you should first open the faucet (valve) of the water pipe and then connect the power. This is safer to avoid the water temperature too high and burn the human body.If it is found that when the water inlet is opened without water flowing out, this means that the water supply system is faulty, and the power switch should be disconnected immediately.Otherwise, the electric heating wire or the electric heating pipe may be dried.When using the water storage electric water heater, first fill the cold water to fill the sink and then connect the power switch. Otherwise, the electric water heater will be damaged due to dry burning, and the valve is prohibited in the water inlet pipe and the water outlet pipe.Cause accidents.
Sensor shower
The main functions and characteristics of induction showerers: 1. Water saving, automatically perceive the human body, people go to the water flow, and the water will stop. The water saving effect is very obvious, up to 30%-50%.2. Hygiene, when the spray head is out of water, the water is stopped, and the water is stopped, which effectively eliminates the cross -infection of bacteria.3. Waterproof, use the full packaging of epoxy resin, and have a long service life.4, anti -fog, winter anti -fog technology, especially suitable for low temperatures in the north.5. Near objects, patent anti -object blocking functions, avoiding constant current flowing water for peoples obstruction.

Related tags： Appliances