Electric ceramic furnaces and induction cookers are frequently used in our daily lives. The two have only one word, but the effects are not the same.Is it easy to use an induction cooker or a pottery stove?The appearance of the electric ceramic furnace and the induction cooker looks similar, but there are still differences in their applicable cooking methods, pots, etc.How to choose a good electric ceramic furnace?
Which is better for electric ceramic furnace and induction cooker
Induction cooker: Although it is more traditional in appearance, with the advantages of heating principle, the induction cooker is faster and more energy -saving. For users who love hot pot, the induction cooker is undoubtedly very practical and the price is relatively low.
Electric ceramic furnace: First of all, the appearance of the pottery furnace is more fashionable, and the characteristics of low radiation are more suitable for people such as pregnant women.Because it is armometer itself, the pottery stove does not pick the pot. As long as it is a flat pot, it can be used, and it can even use the grill directly for barbecue.Of course, there is a relatively serious disadvantage of electric ceramic furnaces. After the use of the pottery furnace is used, the problem of high temperature burns should be avoided.
How to choose a pottery furnace
At present, the temperature of the electric ceramic furnace on the market can generally reach 700 degrees high temperature. After 5s, the furnace surface temperature can reach 700 degrees.In order to ensure safety, except for the center of the furnace, please pay attention to whether the edge of the furnace surface, panel, etc. are in a high temperature state. Generally speaking, except for the heat scope of the pottery furnace, there are insulation measures in other locations, or high temperature indicator lights.Any harm to the human body.
Due to the influence of the rear panel of the pottery furnace, the temperature will be higher. In order to extend the service life of the electric ceramic furnace, a built -in fan will be cooling.The good fan design is generally three -dimensional or four -dimensional three -dimensional design, with high wind and low noise operation. This can be listened to the wind to judge its quality.
Due to the high temperature of the electric ceramic furnace, its panel design must be high to resist, and the good electric ceramic furnace generally uses microcrystalline or black crystal panel. The texture is hard, the surface is smooth and easy to clean.At the high temperature of 800 degrees, waterproof and explosion can also be performed. It will not release toxic substances and is very safe and healthy.
Cleaning and maintenance of electric ceramic furnace
1. Before cleaning, you should shut down the panel to cool down and remove the power plug before cleaning.
2. Micro -crystal board, control panel and body body slight dirt, please wipe with a soft wet wipe. Wipe the oil dirt with a soft wet cloth with a small amount of toothpaste or a neutral cleaner, and then wipe the body with a soft wet wipe.Do not use a hard brush, wire ball, powder -like cleaning agent to clean.
3. When cleaning, prevent water flowing into the machine. After cleaning, use a dry cloth to dry the water stains and dry it before using it.Do not rinse or immerse them in water directly with water.
4. When not in use for a long time, pull out the power plug away from the socket and do the dust protection protection of the stove body.
5. Keep the bottom of the pot clean to avoid the dirt at the bottom of the pot and sintering on the microcrystalline board.
6. There are coke on the furnace surface. Use a shovel to eliminate a 45 -degree diagonal angle. Then use a soft wet cloth to dip a little toothpaste or a neutral cleaner to leave it without leaving residue.
7. When the pottery furnace is used, it is surrounded by 10cm of space, which is conducive to heat dissipation.
8. The pots on the panel cannot be burned empty. The harm to the electric pot furnace is particularly large when burning. At high temperature, the pot should be placed lightly and be careful of the damage of the panel.
9. Before maintenance and cleaning, you need to wait for the high temperature indicator to extinguish and turn off the power gate switch.

Related tags： Appliances