Microwave is an electromagnetic wave.The microwave oven is composed of power supply, magnetic control tube, control circuit and cooking cavity.The power supply provides about 4,000 volt high pressure to the magnetic control tube. The magnetic control tube continuously generates microwaves under the power of the power supply, and then passes through the waveguide system to be coupled to the cooking cavity.Near the import of the cooking cavity, there is a rotatable mixer. Because the mixer is a fan -shaped metal, it has reflected in various directions to the microwave after getting up.food.
Introduction to microwave oven characteristics
1. Reflexuality.Microwaves will be reflected back when encountering metals. Therefore, the inner wall is made of specially treated steel plates. According to the reflection effect caused by the inner wall of the microwave oven, the microwave is penetrated back and forth to strengthen thermal efficiency.However, a metal container must not be used in the furnace, otherwise it will affect the heating time and even cause discharge in the furnace.
2. Throboic.Microwaves have penetrating the general ceramic, glass, heat -resistant plastic, wood, and bambooware, so they are the best utensils for microwave cooking.
3. Absorption.All kinds of foods can absorb microwaves, causing molecules in the food to oscillate and friction and generate heat energy.However, the penetration of various foods is different depending on the quality and thickness of the amount, thickness, and other factors.
How to clean and maintain microwave oven
1. After using it each time, use a wet towel to wipe the inner wall and turn of the furnace, then wipe all the moisture with a dry towel, and open the furnace door for a while to ventilate.Wipe clean the gap and door hinges. Do not leave the new object that causes the furnace door to not switch and leak radiation.LG microwave oven MH6343SDR inner surface uses high cohesion and high -temperature coating materials.The microwave reflex capacity is strong, and the high temperature and stability are not easy to penetrate; improve the energy efficiency utilization rate, and the surface is cleaner and more worry -free.The test results show that the removal of this easy clean coating stains is about 10 times that of ordinary coating.
2. The four corners of the furnace wall and the place where the door is connected to the door should be kept clean.If there is a cleaning agent or food debris and oil stains on the door hinge and the door gap, you can use a wet cloth to dip some neutral cleaners.Scrape the metal protective layer of the stove wall.If the microwave oven is wiped immediately after using it, it is easy to form oil dirt in the inside, so you have to use special tricks to remove dirt: put a glass of water into the furnace, cook on high heat for 2 to 3 minutes, so that the microwave oven is full of vapor, so that the stubborn causes can be caused by dirt.It is full of water and becomes soft and easy to remove.
3. If there is a odor in the furnace, you can put a glass of water into the stove, add a tablespoon of lemon juice or white vinegar, hot hot for 2 to 3 minutes, remove the cup and then clean, the odor will be eliminated.
4. The outer wall of the furnace should be cleaned from time to time to remove the oil stain caused by daily cooking, so as not to reduce the efficiency of the microwave oven.
5. Keep cleaning in the furnace.After disconnecting the power, wipe with a wet cloth and neutral detergent. Do not rinse or let the water flow into the electrical appliance in the furnace.
When cleaning the inner cavity of the microwave, do not miss the yellow rectangular cloud mother film on the right side of the inner cavity. Its quality directly affects the function of the microwave oven and the service life.If Yunmu films are severely polluted or even penetrated, it may cause short circuit circuit and cause various dangers.
Related tags: Appliances