The strong exhaust gas water heater is a kind of heat exchanger with a particularly long heat transfer pipe and the area of ??metal contact.It is particularly low, and this thermal exchanger has extremely high thermal efficiency.
Strongly exclusive gas water heater repair
Automatic flameout during combustion 1. Sensing needle break or induction of flames 2. Insufficient gas pressure 3. Short -circuit or bad solution of the temperature controller line: 1. Replace or adjust the height of the induction needle 2. Adjust gas pressure or replace the pressure reduction valve 3 3, Re -connect the route or replace the temperature controller
Principles of Strong Elimination Gas Water Heater
The strong exhaust gas water heater is forcibly discharged outward through a exhaust motor set above the water heater, so that the burning exhaust gas is quickly discharged outdoors.Power on the gas water heater through an external plug. The main parts are: pulse fireware, ion sensing probe, temperature controller, wind pressure switch, insurance tube (some gas water heaters), capacitor, exhaust motor, micro -motion switch, Valve control solenoid valve, water control valve, water and gas linkage device, burner, circulating water tank, total circuit control package, ignition indicator light, temperature indicator screen (old -fashioned), gas ratio regulating valve (old -fashioned), etc.Scientific development of some new technologies, slowly some new parts have joined in, and some common components are listed here.Under the condition of power, water, and ventilation, due to the pressure of the water flow to turn on the micro -switch, the exhaust motor starts to work out, and at the same time, the pulse thermal point starts to discharge.The spark was ignited, and the circulating water tank began to heat, and the hot water flowed out quickly after the cold water was discharged.If the water temperature is higher than 50 degrees, the temperature controller is limited, the power is cut off, and the gas is extinguished.If the outdoor wind pressure is too large or the flue is blocked, the circulating water tank is used for a long time that causes the water tank to melt the adhesion, the exhaust air is not smooth, the wind pressure switch will turn off the power, and the gas water heater stops working.Usually the wind pressure switch is more likely to cause failure, manifested as: the gas water heater can be started, but it automatically turn off in a few seconds or a few minutes.
Strong -row gas water heater price
There are many brands of strong gas water heaters, and the price of each brand will be slightly different.The general price is about 2000 yuan.
Strongly arranged gas water heater brand
Strong gas water heater brand Wanhewen gas water heater, Wanjiale strong gas water heater, Haier strong gas water heater, Midea strong gas water heater, energy -raising strong gas water heater, cherry blossom -type gas water heater, AO AO AOSmiths strong gas water heater, Vantages strong gas water heater, Ariston strong gas water heater, Sakura snow strong gas water heater, etc.
Related tags: Appliances