The water heater refers to a device that increases the temperature of cold water into hot water through various chemical principles.Billic water heater is a brand product in Germanys Bilchi water heater.
Billiqi water heater after -sales phone
The 24 -hour service hotline of the Biliki Water Heater Repair Center: 56200772 Biliqi water heater maintenance center is one of the outstanding enterprises developed with maintenance water heater products as the main body.Advanced experience in management.Each classification corresponding to the maintenance of water heaters has excellent technical talents, and has quite accurate and fast maintenance and repair capabilities.Essence
Biliki water heater repair
First, the stalling during use 1. The valve of the gas is not all opened.Treatment method: Open all the gas valve.2. Gas pressure is not suitable, too low.Treatment method: continuously switch the hot water system until the fire.Maintenance personnel check the pressure reduction valve.3. Cold water pressure is too low.Treatment method: Maintenance personnel check the water pressure.If you start the water pressure 0 0.035MP and there is such a situation, you should adjust the water volume control screw under the gas valve, and adjust the water output.
Leakage of Bilchi Water Heater
Generally speaking, in addition to the body leakage of the water heater, the water leakage of the water heater is also easy to cause failure such as pipelines, mixed water valves and safety valves. These can be resolved by replacing accessories.However, if the body is leaking, the reason may be because the endbructure is ruptured and cannot be used normally.Of course, if you want to change the price of external parts, the price of the water heater is higher than the price of the water heater, and there is no maintenance value.Sometimes it is better to replace the new water heater directly.Of course, in order to avoid the corrosion of the hot water lined, it is recommended to clean the water heater and replace the magnesium rod every one or two years.Magnesium rods have the function of inhibiting scale and impurities, which can protect water heaters and extend their service life.
Washing of Bilchi hot water heaters
You can clean up yourself.There are generally three ways to clean up the scale cleaning of the water tank of electric water heaters:
1. Some water heater water tanks have special sewage nuts. This water heater can be discharged directly to discharge the sewage nut.When the water in the water tank is almost finished, the scale in the water tank will be taken out.After putting the water, twist the nut, add some tap water to the water tank, and then remove the sewage nut and put the water, so that you can clean the scale in the water tank several times.
2. Some water heaters can discharge water from the angle of the safety valve, but the water is too slow and the effect is not good;
3. The water heater without a special sewage nut, it is best to remove the water pipe and safety valve of the right strap safety valve to remove water and discharge water.
Bilich water heater price
Billic water heater instructions
There are some things to pay attention to when using the Bilich water heater.First of all, the plug of the water heater is allowed to be inserted on the power supply. It is best to be a relatively high position on it, and it is not very convenient and dangerous to insert it back and forth., Empty the water in the inner linery to avoid freezing and damage the inner biliary. Pay attention: must cut off the power after the discharge; in addition, clean the shell, do not spray it directly with water, quickly power off, wipe it quietly with a soft wet cloth, and then use the soft wet cloth, and then use the soft wet cloth, and then use the soft wet cloth.Dry the dry cloth.It is best not to use water heaters when playing thunder.

Related tags： Appliances