Heating is a heating equipment.It is mainly used in the cold northern region in winter and has a warmth effect. In the past, cast iron heating films have been used. Now more materials have been developed.So what are the heat dissipation methods?What should I pay attention to when installing?
Cooling method
1. Thermal conduction: The heat media in the heating tablet changes heat in the radiator to pass the heat to the inner wall surface of the heating tablet.The inner wall is passed on to the outer wall by heating.Steel system is mainly radiation; copper and aluminum composite, aluminum alloy are opposite and radiation.
2. Radiation radiator: The radiator is mainly radiating, and the radiator of the heating room with the opposite side is the auxiliary formula.The water temperature is high.The indoor heat distribution is relatively uneven, and the radiator itself is hot.Such as cast iron radiator, column steel radiator, etc.
3. Reliable radiator: All or mainly rely on the heat dissipator of the surrounding air to heat up.The indoor heat distribution is uneven, the temperature is heating faster, and the panel is not hot.
Pay attention
1. When intending to install the radiator, the first thing we need to do is to install the radiator, which location is the best heating effect, and which location is beautifully installed. Of course, which location is the best installation.
2. In the process of installing the radiator, the most important thing is safe and closed.Special attention is that there must be no leakage.From another perspective, that is, the difficulty of construction. Without special cases, do not change the position of the heating tablet at will. If this is the case, it may not only cause inconvenience to yourself, but also to others and neighbors.
3. The final stage, that is, after the heating film is installed, test and accept it. Usually the production of this industry, after installation, the test is indispensable during the test.Usually, when the construction is replaced, the workers and masters will reserve valves on the pipeline. The stamping test should be performed after installation.It is determined that there is no leakage, dripping water, water, and running water. There is no problem with the installation of the radiator. This also completes the test acceptance of the radiator.

Related tags： Appliances