The range hood, which is an electrical appliance such as the oil fume generated by the family kitchen to suck and cooks. It should not only complete the functional role, but also have the concept of decorative concepts that integrate the pattern of modern kitchen.
Hood buying skills
The material of the stove head and the pot rack is part of our attention.Try to choose as much as copper as possible, so that the straight and straight speaker structure is convenient for us to clean.It is best to choose electroplating paint for pot racks, which will be easier to clean up than uneven iron -casting pot racks.At the same time, the stove should also be selected from the one that is fully closed down, so that if the cooking is overflowing, it will be concentrated together for easy cleaning.In addition, we are best to choose the kind of kitchen cooker. In this way, when we cook more time, we can make time to do other things. There is no need to always stare at it, worrying about more than time.In addition, when choosing a ignition method, it is recommended to use electronic ignition. It saves power and can not need to change the battery for a long time.If we choose the two stoves, it is best to have different thermal effects of both eyes, so that we can make different firepower needs at the same time.The stoves of the two stoves should be smaller at each other, so that when cooking on the table usually less than 75cm, it is convenient to smoke efficiently.
What are the misunderstandings of the hood?
The more the one -power misunderstanding, the better the oil fume effect will be
Promotioners often use power to make articles, saying that the greater the power, the better the oil fume effect will be. This is a big misunderstanding.In fact, there is no inevitable connection with the effect of power and oil fume. If a range hood is only a large power, the turbine is rough, the motor manufacturing is not off, and the quality of the inner cavity is poor.Effect.
The material of the misunderstanding of the second panel is irrelevant
Regarding panel materials, the promoters may "deliberately forget" not to mention it, or directly say the term of a certain alloy to flicker consumers.In fact, the material of the range hood is very important. Imagine that a range hood must be contacted by the corrosion of various types of oil fumes and seasonings every day. It may not be seen in the short term, but after half a year or a year, it will occur such as fading, Oil -leakage smoke and other issues.If it is corroded to the wire, it will cause a short -circuit of the wire and burn the motor.In fact, it is also very simple to test the material. The best domestic materials are generally made of imported M-CR stainless steel, which looks fine and textured.This material is anti -oxidation, corrosion resistance and brighter and brighter.To distinguish the difference between such materials and general alloy materials, you only need to try it directly with magnets. If you can suck it, it must be general inferior alloy or iron.
Drisian three internal cavity design is not important
The importance of the inner cavity design of the range hood cannot be ignored. On the one hand, it is necessary to be as seamless and easy to clean as possible. At the same time, it must be able to protect the lines and enable various lines to work properly under the condition of strong corrosion of oil fume.Corrossed.The seamless design in the inner cavity is not only seamless in the cavity, but also the small surface that is parallel to the stove can be seamless. At the same time, the combination of the oil net and the inner cavity must be "invisible and seamless."For example, setting oil -proof walls, etc., this is really without cleaning dead ends.
Misunderstanding 4 can be free of disassembly and washing function.
The absolute free disassembly and washing of the range hood is impossible. After one year of the range hood, it must be removed and washed. Otherwise, due to the adhesion of the turbine and inner cavity, it will seriously affect the oil fume effect.Therefore, a range hood cannot be "disassembled and washed" without limit, and it should be designed as "demolition and washing". After one year, you can remove the oil net and turbine at home. This is really easy to clean.

Related tags： Appliances