The structure of the European range hood is different from the structure of Chinese and side -side range hoods. The European -style hoods need to be more patient when cleaning, and there are more steps. Generally, there are fewer oil fumes in the cooking of Europeans and Americans, so small displacement smokeThe range hood can meet the needs.The structure of the European range hood is different from the structure of Chinese and side -side range hoods. The European -style hoods need to be more patient when cleaning, and there are more steps. Generally, there are fewer oil fumes in the cooking of Europeans and Americans, so small displacement smokeThe range hood can meet the needs, which is one of the reasons why the kitchen cabinets in European and American countries are mostly open.
How to clean the European range hood
When removing the hood, put it lightly, especially the old range hood.Do not disassemble and wash the lampshade. Non -professional in motor and line boxes should not touch it, so as not to cause hidden safety hazards to cause short circuits.Wind wheel cleaning must be cleaned, so as to avoid imbalances while gently, the hood vibration will be great.When the hood is installed, the pipeline must be sealed tightly to avoid leakage of cigarettes to spend your kitchen.The protective cover should be more careful when disassembling and installation. The protective cover is very thin and sharp, and you will cut your hands if you are not careful.Remember this, you can go to the hood.For other unsatisfactory measures, please discover and take measures by yourself to ensure the safety of personal property.
European range hood disassembly and washing steps
1. Unplug the plug and cut off the power.First of all, ensure personal safety, and then do other.
2. Remove the oil cup and filter.This is extremely easy. I also believe that those who often work in the kitchen often operate these, and no longer talk about it.
3. Disassemble the protective cover.There are generally two sections of the protective cover. Most of the above sections are fixed on the ceiling with screws. They are also fixed on the wall with screws. There are also magnets that are adsorbed on the upper fixed frame with magnets.A little observation is easy to get it.Magnetic, grabbing both sides with your hands, fell off with your hands.Shrink the first section to the following section, and then remove the protective cover below.The following section of the protective cover is mostly fixed screws in the back. You need to hold the range hood, and then remove the screws and remove it.There are no screws behind the part, just take it directly.
4. Remove the overall range hood.The master of Elexs professional cleaning range hood said that almost 99 % of the range hoods are fixed.There are two hooks on the wall, and there are two gaps on the hood, just hang it directly.Therefore, if you disassemble, you need to pump up, and then pull it out.A few are fixed with expansion bolts. You need to twist the nut and then remove the range hood.
5. Disassemble the block.After the protective cover is taken down, you can remove the block.The blocks are generally in front, a few on the side.There will be about eight screws, which can be removed after disassembling.
6. Disassembly wind wheel.Wind wheel is the key part of the range hood, and the master of Elexs professional cleaning range hood said.It is to rely on the turning of the wind wheel to smoke.Therefore, the range hood should be cleaned regularly to avoid too much oil, affect speed and increase motor load.The wind wheel is fixed by a large nut, and it can be removed from reverse rotation.In other words, the tightening of ordinary screws is clockwise, and this nut clockwise is just released.
7. After the wind wheel is removed, clean it, and clean the oil in the snail shell.Wash it with a shovel, newspaper, iron brush, etc., and the cleaning of the range hood is completed.
8. The last step is to install it.Just follow the disassembly steps.

Related tags： Appliances