"Speed ??electric water heater" is an independent electrical water heater product that is different from the water storage and thermal type.It is possible to use a hot engine heat heating technology to heat up/fast water.The technology of anticorrosion and dirt, optimizing water quality, and protecting the inner biliary for a long time without being corroded, no need to replace, once and for all.Let ’s take a look at the method of selecting fast thermal water heaters and the maintenance method of quick -hot electric water heater.
How to select the fast hot water heater
1. When buying a water -storage electric water heater, you must first determine the capacity of the water heater.The choice of water heater capacity depends mainly on factors such as family population and hot water.Generally speaking, if 1 person is used, the volume can be selected at 30-40 liters of electric water heater;
2. 2-3 people should buy 40-50 liters of electric water heaters for continuous bathing; 3-5 people must buy 70-100 liters of electric water heaters for continuous bathing.In addition, the size of the larger capacity is generally large, so the size of the installation space needs to be considered.
3. Inner tendon is the key part of the water storage electric water heater. It can be said that it is its "heart". The performance and quality of the inner tendon directly determine the service life of the water storage electric water heater.At present, the inner bile on the market is mainly three types: galvanized inner biliary, stainless steel inner bilots, and enamel inner bine.In comprehensive considerations from the aspects of anticorrosive, insulation, and service life, enamel inner linery.
4. D5 electric water heaters, as electric products, directly determine the users personal safety.At present, our electricity environment is not very ideal. There is often an accident that the electric water heater leakage is injured.
What is the difference between fast -heat electric water heater and instantaneous heat
1. The hot electric water heater
1. Advantages: Safe small and beautiful, clean and environmentally friendly; that is, hot water is hot, there is no need to wait for hot water for 3-5 seconds, and the use of hot water is not limited. How long will it take?There is no loss; the built -in temperature control meter guarantees that the temperature is between 30-50 degrees and solve the problem of scaling leakage caused by the continuous high temperature.
2. Disadvantages: The power is too large. Installation needs to be reserved in advance.Generally, the power is required at least 6KW. In winter, it is difficult to ensure that there is sufficient amount of hot water for bathing in winter.The power cord requires at least 2.5 square meters, and some require 5 square meters.
Second, fast hot electric water heater
1. Advantages: Safety (refers to the turnover of the power when you shower), clean and non -odor, the larger the volume, the more hot water, the suitable for bathing.
2. Disadvantages: The hot water is long for a long time, it must be waited, and it is not used in hot water temporarily.The volume is generally large, the more the family population, the larger the water heater, and the installation of space. If the water heater is not large enough, the bath should be queuing to burn.Washing and washing are not convenient enough.
Speed ??hot electric water heater repair method
1. No heating: Open the water valve, only cold water flows out, without hot water flowing out.In this case, you should find the interruption point from the outside and repair it according to the situation.Generally, the fuse melting, loosening circuit contact, and the burning of electric heating elements are the causes of faults, and they need to be repaired one by one.
2. Excessive water temperature: Generally, there are three causes of failure, namely the water inlet pipe is too thin, the outlet is blocked, and the thermostat fails.If a failure occurs, check the cause one by one, and find the corresponding method for maintenance.
3. Leakage: It is caused by the insulation damage of the electric heating element, the loosening of the ground wire or the opening of the road, the damage of the insulation or the insulation of the component.
4. Display failure: remove the moisture parts, put it in the disinfection cabinet, bake for a few minutes, and install it back to eliminate the fault.

Related tags： Appliances