The ribbon of the fax machine needs to be replaced frequently, otherwise it will consume the material.Some users may not be familiar with the method of fax machine -mounted ribbon, which requires more refer to the following instructions.So how to install a ribbon in Panasonic 706 fax machine?Lets take a look at it together.
How to install a strap Panasonic 706 fax machine
Before the Panasonic 706 fax machine is enabled, you should read the instructions carefully to better use the fax machine.You cannot disassemble fax components by yourself, such as the electric connection point exposed inside the device will cause an electric shock.Please hand over the fax machine to the Canon fax machine maintenance dealer authorized by the local area.
The fax machine can only run on the horizontal, sturdy and stable countertops.On the back of the fax machine, there are ventilation holes on the bottom surface.To avoid overheating (will cause abnormal operation), do not block and cover these holes.Panasonic 706 faxes should not be placed on the bed, sofa, or other similar soft countertops.It should not be close to the warm air or hot airflower, and the fax machine should not be placed in a place with poor ventilation.
The power supply used by Panasonic 706 fax machine can only be the specified power type specified on the device. The total current used for all equipment inserted on the wall power socket should not exceed the current setting value of the seating circuit breaker.The soft line of the power supply is not allowed to depend on any items. Do not place the fax machine in where the soft line of the power supply will be stepped on.
Do not make the Panasonic 706 fax machine close to water or other liquids. If water is measured on the device or in -equipment, you should immediately remove the electric plug and call the Canon fax machine repairman authorized by your location.Do not make small items (such as large head needles, nails, etc.) fall into the fax machine. If something falls into, you should immediately remove the equipment electric insertion head and call the Canon fax machine repairman authorized by you.
Basic introduction of Panasonic 706 fax machine
There is a button on the right side of the Panasonic 706 fax machine. Press the front and back cover will automatically loosen.Press the front cover with your hands and open it out, and then push the back cover. This will completely open the internal organs of the fax machine. There are two rods in the fax machine.After, take out the ribbon.
After taking out the ribbon, remove the gears on the rolling wheels that have been used and have not used.Then use the running side as a roller wheel and install the gear.Just install the gear on the other side. Put the replaced ribbon into the fax machine and install it into the fax machine. Some of the more places need to be transferred to the roller.Cover.

Related tags： Appliances