What is the curtain machine?How to buy a high -quality offensive curtain machine?The curtain machine is no stranger to people. We can often see it in major public places, and use it very widely.When needed, as long as the curtain machine is started, the air indoor and outdoor air can be separated to prevent hot and cold air in the indoor and outdoor.
How to buy a weather curtain
Application
Hotels, hotels, conference halls, office buildings and other relatively quiet places are suitable for ordinary shaft flow curtain machines; hotels, shopping malls, theaters, hospitals and other places with relatively large air flows should be selected.Large air volume natural wind curtain machines; constant temperature warehousing logistics centers generally use large air -volume centrifugal curtain machines.
Door width
The length of the air curtain machine should be slightly longer than or equal to the width of the door. If the door is too width, it can be used by multiple connections (if the width of the door is 2 meters, you can choose two 1.0 meters of length curtain machines, such as the width at the door, the width of the door, the width of the door.For 2.4 meters, you can choose two 1.2 meters long curtain machines).
Height
That is, the installation height, the air curtain machine can be divided into 25, 30, 35, 40, 45, etc., corresponding to the installation height: 2.5 meters, 3.0 meters, 3.5 meters, 4.0 meters, 4.5 meters, and the conventional flow -type air curtain machine is suitable for installation installation.The height is 2.5-3 meters, and the height of the centrifugal curtain machine is 3.5-4 meters.
Curtain machine size
The air curtain machine is installed on the door. Different door size will be different, but the air curtain machine has its own size. The size of the standard air curtain machine is generally 0.9 meters, 1.2 meters, 1.5 meters, and 1.8 meters. This is generally generallyThe size of the air curtain manufacturer will have the size. If the size of the door is special, the seller needs to order the seller to order the required size in time.
Noise
Each machine operates a certain sound, but if it exceeds the range that people can withstand, it is noise.Different occasions, people have different sensitivity to sound, so when buying a wind curtain, you must pay attention to the noise value of the equipment and which occasion should be used.
After -sales
When buying the air curtain machine, it depends on whether the appearance is beautiful and generous, whether the trademark is complete, whether it is a brand, because the brand machine is better, and there are designated outlets to repair. The non -regular machines are specially repaired by merchants. There are no complete services.system.
Installation of the curtain machine
Installation requirements
1. This machine should be installed on the door frame, and the width of the door must be less than or equal to the length of the wind curtain; (if the door hole is too width, connect several curtain machines to install and use).
2. Installing the bottom plate must be firmly connected on the wall (or on the pillars) to prevent vibration caused by loosening.
3. Before installing the air curtain machine, the professional must calculate the capacity of the power supply and the cross -area size of the wire. There must be no one below the machine when installing the machine.
4. Natural wind machine installation power socket current should be above 10A, heating machine installation power socket current should be above 30A, try not to use other electrical appliances on one socket.
installation method
1. Remove the screw of the hanging panel after the off -air curtain machine, and remove the hanging board;
2. Put the hanging board firmly on the installation position;
3. The air outlet is poured down on the fixed hanging board facing down;
4. Use the removed screw to tighten it again.
How to install the bottom plate
Such as: installed on the concrete wall.According to the position of the hole on the bottom plate, arrange the relative size position of 8 bolts 10 × 60 to embed the bolt in the cement.Then fix the installation bottom plate.Or flood directly on the concrete wall and fix it with expansion screws.
1. After the mulch is fully fixed, fix the bundle of the installation board on the bolt.8 bolts are fixed on the concrete wall or door frame.
2. The body must be inserted into the installation hole in the installation plate.
The use and maintenance of the windows machine
The wind curtain machine piano key switch, one pass the power supply, the other two controls the speed, there are two levels of high and low
1. In order to keep the indoor temperature, please turn on the low speed when used;
2. For dustproof, anti -odor, and moth -proof, please open high speed.
The direction of the wind curtain wind direction adjustment board
1. When indoor heating, rotate the wind guide board and the air outlet is out;
2. When indoor cooling, turn the wind guide board, and the wind is inward.
Method of the wind curtain machine maintenance
1. Check and clean the power before the machine should be cut off;
2. Use a soft fabric to wet the cleaning agent and clean it into the windows, blade blades and hoods;
3. When cleaning the blades, it will be soft, otherwise it will cause deformation and vibration.

Related tags： Appliances