The gas stove electromagnetic valve is an industrial equipment controlled by electromagnetic control. It is used in the automated basic element that controls the gas stove. It is a actuator and is not limited to pneumatic and hydraulic pressure.The gas stove solenoid valve is used to control the flow, direction, speed, and other parameters of adjusting the medium in the gas stove. Nowadays, the control of the gas stove solenoid valve is very flexible, accurate accurate, and the role of play is also diverse.
The role of gas stove solenoid valve
1. The thermocouple solenoid valve can control the volume of the solenoid valve to control the thermocouple of the stove. The coil inside is a single circle.On the shell of the solenoid valve, a single circle solenoid valve needs to press for about 5 seconds when it is ignited, otherwise the electromotive force generated by the thermocouple is not enough to absorb the solenoid valve.In addition, there is a double -circle solenoid valve. The thermocouple is 3 wires. At the beginning of the fire, the battery was powered by the battery. When the thermocouple was generated, the thermocouple was sufficient.Second, the ion extinguishing solenoid valve realizes that the volume of the overall control of the ion extinguisher to ensure that the volume of the solenoid valve is large. At the end of the gas pipe, connect the universal section.After the detection is detected, inhale the solenoid valve. When the flameout is turned off, the ion is first inspected and detected that there is no current passed.Within a few seconds, the flame returns to the normal state. If the flame is turned off, there will be no current through the countdown. Then the single -chip microcomputer responds and disconnects the electromaging valve current, so as to close the gas and avoid the accident.
How to change the gas stove solenoid valve
The solenoid valves of different brands and different models of stoves are not necessarily the same. If it is not good, there will be a possibility of leakage. If you need to replace it, it is recommended to find a manufacturer to handle the on -site on -site on -the -door on -site on -the -door replacement of the solenoid valve.You can take it out when the bolts of the two fixed solenoid valves are unscrewed.
The manifestation of bad gas stove solenoid valve
If it is broken, it will leak natural gas.The action of the solenoid valve is to automatically turn off the gas without fire to prevent gas poisoning.The chance of the solenoid valve is smaller than the thermocouple.The gas stove generally has 2 stove eyes, and there are 2 sets of flameout protection system accordingly. At the same time, the possibility of badness is not high. Generally, I swap the thermocouple of the left and right stove eyes. If the fault phenomenon is interchangeableIt is the problem of thermocouple; if the fault is unchanged, it is the solenoid valve problem.
Gas stove solenoid valve price
KLQD/KLQD solenoid valve is produced by Ningbo Kailin Pneumatic Component Manufacturing Co., Ltd. It was originally produced by Fenghua Kaizhi Potal Component Co., Ltd. It is made of brass material, which meets international standards.Deformation, the problem that the valve board can automatically compensate the tight cover and the problem of automatic balance between the pressure between the pressure between the valve and the valve board.usage of.Its price is 88 yuan.Okai/Rryj-A is better than ordinary thermocouples and solenoid valves. During the work process, the thermocouple is not the heat, and the thermocouple is not the heat, and it gradually loses the thermal potential.Suffering, closing the valve body channel to play a role in safe protection.Fast -off -type thermocouple refers to adjusting its potential size and fast heat on the basis of ordinary thermocouples, so that the solenoid valve is absorbed quickly, and the closing valve time is faster, thereby increasing its sensitivity.Its price is 78 yuan.
Related tags: Appliances