The volume of the freezer is much larger than the refrigerator, the cooling capacity is relatively large, and the shape is relatively simple.Usually commercial uses, such as shops, restaurants, etc., we have some skills when using freezers. We need to briefly understand the basic knowledge of freezer, such as cherishing the cooling method in the freezer cabinet, so as not to maintain how to maintain the refrigerator for a long time.Essence
Broken temperature adjustment tips
First, adjust according to the gear.This is very simple ~, the temperature regulator of the freezer is generally divided into manual gear and digital display operations.There are generally seven gears in manual gears. 0 means that no operation is made. 1 ~ 7 means the temperature range you need to adjust.Digital display is a more accurate temperature control method. The LED display needs to be adjusted, and the accuracy is very high.If you want to adjust the temperature, you need to press the SET key first, and then lower it according to the "arrow" button. For example, adjust the temperature of the freezer to 6 degrees, then the digital display is +06, press the snow flower key to exit, adjust the temperature after the adjustment, and adjust the temperature.Finish.
Secondly, the temperature is adjusted according to the different seasons and the environmental temperature.The four seasons of the four seasons are also very different. Therefore, it is necessary to properly adjust the temperature of the freezer of the freezer according to the changes in the environmental temperature, which not only saves energy, but also improves freshness.For example, it is necessary to adjust to 7 degrees. In fact, the temperature of the freezer is higher than 7 degrees. If the ambient temperature is relatively low, the temperature in the corresponding freezer will also be low.Low.
Third, temperature adjustment should be adjusted according to the stored products.If it is a vegetable stall, the temperature should be relatively adaptable, which is probably the middle position.The temperature can not be adjusted too low, and the vegetable frostbite will be too low; if it is a fruit stall, the temperature can be raised appropriately.Fruits are generally much higher than vegetables, and most of the fruits belong to summer fruits, so the temperature adjustment can make the fruits achieve a better fresh -keeping effect; if it is frozen food, the temperature needs to be lower or even the lowest position.Essence
Cooling method classification in the freezer cabinet
Cold -cold: also known as inter -cold or frostless freezer.There is a small fan in the freezer that the air flows in the box, which is well -proportioned as the temperature in the box, fast cooling rate, and convenient use.However, due to the defrosting system, the power consumption consumes slightly, and the manufacturing is relatively large.
Cold: Also known as frost -electric freezer.Its frozen chamber is surrounded by evaporator, or there is an evaporator in the freezer. In addition, there is an evaporator on the upper part of the refrigerator, which directly draws the heat from the evaporator to cool down.This type of freezer structure is relatively simple, with a small power consumption, but the temperature is slightly poor and the use is relatively inconvenient.
Straight cold type: The electric freezer of this kind of situation is more accepted than new products in the past year.
Do not maintain the refrigerator for a long time?
1. Unplug the power plug of the refrigerator and take out everything in the refrigerator.Open the refrigerator door and other frost. Be careful not to use a sharp weapon. The evaporator is an easy leakage of aluminum.Wipe the refrigerator from the inside to the outside with a clean rag and wipe it clean.
2. Adjust the temperature controller at "stop" or "0" or "max" (strong cold points), so that the elasticity of the temperature controller is naturally in the natural state and extend the life.
3. When the refrigerator is not used, the door should be packed with things to prevent the box and the door sealing. If it is not used for a long time, you can apply some lime powder on the door seal.
4. The refrigerant of the refrigerator is very low, so dont worry about the refrigerator in a high temperature place.
5. When moving the refrigerator, it should be established in parallel. Do not tilt to prevent the compressor from dragging the cylinder.Put it in a ventilated place to avoid direct sunlight.
6. Do not use a plastic bag. There is a certain amount of water in the indoor air. The tide absorbed by the refrigerator is not easy to emit, which will cause corrosion and damage metal components of electrical components.
7. If the conditions are best, the last month is used to make the last month, so that the compressor runs normally after 30-60 minutes before closed, so that the compressor preheats.

Related tags： Appliances