Gas stove is also a kitchen appliances used by most people.However, it should be noted that when buying a gas stove, you must first know the gas source used in your home, and pay attention to the size of the gas stove.In addition, the gas stove must be installed correctly. During the use process, the gas stove cannot be hit. It is determined whether the battery needs to be changed.Today, lets take a look at how to install the gas stove?What should I do if the gas stove cannot be hit?
How to install the gas stove
1. Install the gas pipe.Before installing the gas pipe, we need to put the cooker into the stove that is opened in advance.
2. Clean up the inlet of the cooker, then put the rubber pipe joint into the linker of the cooker and exceed the red line, and clamp it with a pipe or a pipe hoop.
3. Check whether there are batteries in the battery box. If you do n’t buy a battery and install it, it is usually No. 1 battery.
4. Start opening the knob to test whether there is fire, or to see if the color of the flame is light blue. If the color of the flame is yellowish or reddish, you need to debug the gas stove.
What to do if the gas stove cannot be hit on fire
1. Do you have any qi? Generally, people have the bottom of this, but some people may be more sloppy, or they are busy with work, and often forget it, so when encountering a gas stove, they must first check whether there is still gas.
Solution: If the gas stove is not available, you must get angry.
2. Whether the battery has electricity is the easiest problem to encounter, and it is also a problem that people are generally more concerned. When you find that you ca n’t get a fire, you must check whether the battery is electric.
Solution: If the gas stove battery is not ordered, you only need to change the ordinary 1 battery.
How to change the gas stove battery
If you hear the long ignition sound of "pop -pop" or only a sound, it will not sound, and the fire can not be ignored, indicating that the pressure is too low, and you want to change the battery.The battery box is at the bottom of the gas stove.The battery box is designed to be self -locking.Remove the battery box: In the "opening state", the block is pushed forward in the middle, and then loosen, the device will pop up the battery box.Put the battery box: Put the battery box correctly into the battery box, continue to push in hard, you will hear or feel the "click", say that the pool box has been installed.
Related tags: Appliances