Overview: Weather volume, wind pressure, noise, motor input power are the four important indicators that affect the performance of the range hood products. Buy high -quality branded range hood products. Consumers installation methods, working principles, daily use and cleaning of the range hood machineKnowledge should be slightly understood.
Precautions for the installation of range hood:
1. How to use the range hood
Insert the power plug into the three -core power socket with an grounding device.
(1) In the shutdown state, press the strong and weak keys, you can start the hood, run in the strong wind/weak air state, and the strong and weak keys have interconnected functions.
(2) The light button is used to control the lighting alone, click the light to light up, and then click the light to destroy.
(3) In the state of power, press the key to stop the hood in the running state stop working.
2. Precautions
(1) The gas discharged from the range hood should not be discharged into the hot flue used to discharge the smoke used to discharge the burning gas or other fuel to prevent the fire from the occurrence of fire.
(2) When the range hood consumes gas or other fuel, the room must be well ventilated.
(3) It is forbidden to bake the range hood directly.
(4) A reliable ground -ground power socket must be used.
(5) If the soft line of the power supply is damaged, it must be replaced with a dedicated soft line or a dedicated component bought from its manufacturer or maintenance department.
(6) If the prescribed method is clearly defined, the range hood is in danger of getting angry.
(7) When replacing the bulb, please unplug the power first. Each bulb is not more than 20W.
(8) When cleaning, please put on rubber gloves to prevent metal parts from hurting people. The dismantled parts should be placed lightly to avoid deformation.
(9) When cleaning the wind wheel, you should be particularly careful. You must not collide with the weight block of the blades or move the blades, otherwise the whole machine will vibrate and the noise will increase.
(10) For a long time, please unplug the power line plug.
Method of the range hood
1. If your kitchen is in a state of decoration, please do not expose the range hood, because building materials, dust, paint, paint, and the volatile gas they volatile will cause corrosion and luster of the surface of the oil absorption.Install the range hood after the decoration.
2. Do not install the range hood on the wall of flammable materials such as wood, and the wall surface of the range hood should be irregular.
3. Do not install the range hood in the upper part of the furnace of the solid fuel.
4. Do not make the range hood and other gas appliances (for example: gas water heater, etc.) share a flue.
5. Avoid the wires buried in the wall when drilling the wall, so as not to cause the danger of electric shock.
The working principle of the hood
1. Preparation before installation
After the box is opened, please carefully check whether the product accessories are complete and whether it is damaged.If you find a problem, please contact the dealer and replace it.
安 Check whether the installation of each component of the product is correct and whether the screw is tight to avoid damage that may occur during transportation and affect product use.
2. Determine the installation location
The range hood should be installed on the front of the cooker on the same axis line as the cooker, and the level of the left, front, and rear positions should be kept. The distance from the bottom of the range hood should be 650 ~ 750mmAppropriately (200 ~ 400mm) should be decided according to the specific usage), and the range hood should not be installed in places with large air convection.Find the installation position of the hood hanging panel on the wall, draw a good line with a pencil, and use the level instrument when drawing the line to ensure the installation level of the range hood.
How to install a range hood
3. Fixed hood hanging board
Drill the hole in the installation location and fix the hoods attached to the packaging box on the wall.
4. Hang the hood on the hanging board
Hang the range hood on the hanging plate to ensure that the range hood is not shaken and decoupled and try to ensure the level.
5. Install the smoke exhaust pipe
One end of the hue exhaust pipe is connected to the air outlet on the range hood, and the other end is closely related to the shared smoke or the wall holes on the exterior wall (pictured).If you smoke to the shared flue, do not insert the smoke drainage into the depth of the smoke, which will increase the resistance of smoke. If you smoke to the wall, it is recommended to put 100 -leaf window on the outer outer of the smoke exhaust pipe to avoid the net back into the room.At the same time, please be sure to extend the mouth of the tobacco pipe 30mm.
6. Install oil cup
Wring the oil cup to or push into the place in place and fix it
7. Debug the range hood
Press the power button, press the lighting key, light up the lights, press again, the key bounces, and the lighting lights go out.Press the high -speed switch, run at high speed of the motor, press the low -speed keys, the motor becomes low -speed operation.

Related tags： Appliances