What should I do if the pants zipper cant be pulled? Everyone will encounter many embarrassing things in life.When you go to the toilet, you suddenly find that your pull lock cant be pulled, how embarrassing it was at that time.How to repair the pants zipper? The zipper is composed of two rows of neatly arranged chain teeth. It moves up and down through the pull ring to achieve the purpose of co -separation and separation.What should I do if I ca n’t hold it in the zipper? How to repair the pants zipper?
What is a zipper
Zipper (Zipper) rely on continuously arranged chain teeth to make items coincide or separate connectors. It is currently used in clothing, bags, tents, etc.1、由两条带上各有一排金属齿或塑料齿组成的扣件，用于连接开口的边缘(如衣服或袋口),有一滑动件可将两排齿拉入联锁位置使开口封闭; 2. Connect a chain that is tightened, stable, or guided to the object.
How to repair the pants zipper is broken
1. Use a wire disassembly to remove the sutures at the end of the zipper.No need to disassemble too much.The purpose of the line disassembling is to expose the metal section at the end of the zipper and the structure of the end.Dont think about removing the entire zipper.Remove the metal section.You can use a pointed clamp to open the metal section and remove it.Be careful to prevent excessive lines, or accidentally break the zipper.
2. Take down the slider on the zipper.Take the slider on the zipper from the zipper.If you cant get it, you can open it with pliers.But this is very likely to damage the teeth or zipper, so lets pull it down as much as possible.
3. Carefully set the new slide.Before pulling the slider up, let the zipper enter the top of the slider, and then let it go through the slider.
4. If you have a small problem when you slide, try the big head or sewing needle, and carefully pull the zipper into the slider.Make sure that the teeth in the slider are bite together.
5. Until the end, there are closed teeth at the end, and then pull the slider up.
6. Switching a piece.At least six stitches at the bottom of the zipper, be sure to sew it under the slider, and a new combined piece is formed.
7. The metal section can not be installed when it is unloaded, but a few shots can replace the section.Set up the zipper again.The zipper is sewed back according to what was removed.This step is over.The zipper is safe at this moment, and the slider can move back and forth smoothly.
What to do if the pants zipper cant be pulled
First, you can pull the tail of the zipper, pull the zipper straight, and then repeatedly pull from the bottom to top to check whether it is smooth.You need to remove the obstacles to return to normal.Second, the simplest and effective method is to apply a layer of wax on the surface of the zipper to use the wax lubrication to achieve a smooth effect.After wiping with the candle on the surface of the zipper, then repeatedly pull it a few times from the bottom to top, the zipper is smooth.
Third, in addition to wax, you can also use lubricating oil. You must pick a more transparent and clean one. After dripping a few drops on the zipper ring, repeatedly pull it a few times to achieve a smooth goal.
Fourth, some pants have zippers, but they need to be soaked when washing their pants. Pants that have been soaked for a long time are prone to the problem of unsatisfactory zipper. The following is a solution:
1. If the pants need to be soaked, in order to avoid sequelae, remember to pull the zipper.
2. Use the candle to apply a layer of wax film on the front of the zipper.
3. After the front is applied, the inside of the zipper must be turned over.
4. Take the buttons that have been buckled, the zipper has been pulled and finished with the waxed pants, so you do n’t have to worry about the sequelae of the zipper.

Related tags： Apparel