Regardless of the long -term (or not in use) of dry ice shoes or water ice shoes, maintenance, cleaning and storage should be performed.So how should we maintain skating shoes? Lets follow the editor to take a look!
How to maintain skating shoes
Regardless of the long -term (or not in use) of dry ice shoes or water ice shoes, maintenance, cleaning and storage should be performed.So how to maintain skating shoes? Lets follow the editor to see! China
First, clean the stains on the surface of the shoe body.
1. The plastic part of the shoe can be wiped with cloth with water.
2. For detachable inner sleeves, you can take it out directly.
3. For semi -dismantling or non -demolished shoes, the bearings and shoe racks should be removed before brushing.
4. Wash the stains and sweat stains inside and outside the shoe cover with detergent water.
5. Put the washed shoe covers in the shade and ventilation. Do not expose it. You can also dry it with a washing machine before drying.
6. Rub the waste newspaper into a ball, stuff it in the shoe, and tighten the shoelaces.Must be stuffed to prevent the back pressure deformation, and then squeeze your feet when you wear it.
7. Put the disassembly part and seal it with a plastic bag (the best desiccant in the plastic bag) and then store it.
2. Clean and maintenance of ice knife
1. The ice knife must be dried in time after the ice is slipped.
2. Wipe the stains and rust on the ice knife before the collection.
3. Put it in a cool and ventilated place to dry, do not expose it.
4. Apply the blade to Vaselin or oil.
5. Wipe the leather surface with shoes oil.
6. Set the knife and apply a plastic bag seal (it is best to put some desiccant in the plastic bag) and then store it.
Third, the dry and ventilated place should be selected to avoid deformation caused by squeezing.When you encounter the Meimei season, take out inspections and drying to avoid mold.
Maintenance of dry ice shoes:
1. The most effective way to replace the wheels
1. Pick each wheel number first and mark on the wheels.
2. When changing the wheels, it is recommended that you exchange No. 1 wheel with your left foot with the No. 3 wheel of the right foot, and the inner and outer side of the wheel is also replaced (reversed).According to this rule, then exchange the No. 2 wheel of the left foot and the No. 4 wheel of the right foot, and then the No. 3 wheel of the left foot and the No. 1 wheel of the right foot swap. Finally, the No. 4 wheel and right foot on the left footThe No. 2 wheel interchange.Special attention is that the movement of changing wheels only takes half a month to one month.
2. Adjustment of the height of the skating shoe wheel
When installing the wheels on the chain, a high -end skate needs a part called the adjustment pad. We can meet the height of the wheels with various movements.
Third, the maintenance of the bearings
If the bearing is contaminated with dust, it can be cleaned with a dry cloth or abandoned toothbrush.Because most of the bearing is exempt, the sealing cover cannot be removed. Such a bearing must not be oily on the outside. Because there is oil outside, it is easy to get dust on the taxi.EssenceFor professional speed skating bearing, please find a professional roller ski shop for maintenance. Dont easily disassemble it yourself.
Fourth, bearing replacement
Use the hexagonal wrench for the dry ice shoes to remove the bearing bearing, wipe the wheels with a dry cloth, and install the new bearing back. Pay attention not to twist the screw too tightly.Do not shake the principle.
Fifth, cleaning of the inner cover of skating shoes
Direct -row skating shoes are more energy -consuming, and it is easier to sweat during exercise. Therefore, it is necessary to clean the insoles of ice shoes every time, elbows, and knee pads, which can not only eliminate the odor but also increase the service life.
Cleaning steps of the lining
1. Put the cushion in the laundry basin and warm water.
2. Add the dedicated and rinse washing Ji.
3. Soak for one night, take it out the next day, put it in the shade and dry it.
4. Remember to use warm water. If you soak it with cold water or hot water, the pad will be damaged or deformed.
6. Replace the brake head in time
If the brake device of the heel is used frequently, it will soon wear. Once the wear is severe, it is easy to lose balance when stepping on the brakes. It may also cause the brakes to be unclear. Therefore, it must be replaced immediately after the brake pads are smoothed.
Please indicate the source in China

Related tags： Apparel