Ribbon is a kind of printing consumables we are familiar with.The composition of the ribbon is very simple, which is made of nylon wire as the raw material.Let ’s take a look at what the strap is with Xiaobian?What is the use of it?
What is the ribbon
The composition of the ribbon is very simple, which is made of nylon wire as the raw material.A good ribbon, the base should be durable, elastic, and cannot printed hair for a long time, constant lines, and no Heye edges.Its performance is mainly based on the flat surface, no protruding fiber knots, the latitude and weft density tissue is evenly tight, cutting edges and uniform, and non -focal paste phenomenon.Touch it by hand: good and delicate with the base, there is a sense of smoothness.Good elasticity and good recovery.The bad ribbon -based broken lines are very powerful. When you touch it, the hand feels hard, the cutting edges are uneven, the band is burnt, the elasticity is small, the recovery is poor, the printing is often sandwiched, it is easy to get up the ruffled edge, and the needle head is blocked., Card belt and other phenomena.
Category
In terms of printing principles, the current ribbons are mainly divided into three types of traditional collision -collision colors and thermal transfers, and they gradually appear and popularize in the later period.The former is mainly used in office equipment such as needle printer, English printer, pitch machine and attendance machine. Thermal transfer ribbon is mainly used for office equipment such as fax machines and barcode machines. The hot -raising band is used for heating printers and digital printingOffice equipment such as machines.
1. Balm -based carbon belt
That is, wax and carbon black (assumed as a black carbon zone) as the main material, as products with coating materials.The waxy -based carbon belt is the most economical and cheap carbon belt. It is mainly used for the printing of general paper. The use of a waxy -based carbon belt must pay attention to the cooperation with the paper.It is not suitable for products with smooth surfaces such as PET materials.The waxy -based carbon belt occupies a market of about 70%of the market, which is commonly used for generally printing large paper tags such as wheat head.
2. Resin -based carbon belt
If the printed data must be required to be able to resist the solvents and resist high temperature, etc., for chemical product packaging, or high temperature resistance, for electrical heating parts, or must be printed on a special PET and other chemical products, it is recommended to use resin carbon belt beltBecause the composition of the resin can meet the above requirements, but this carbon belt is usually relatively high, but the printing effect must be matched with the paper/printing medium to meet the best printing level.
3. Mixed -founded carbon zone
That is, the main material is mixed with wax and resin as the product as the coating material.The proportion of mixing changes with need, mainly used for smooth materials on the surface. Generally, it is more suitable for products with strict surface requirements.Advantages.
How to change the ribbon
1. Open the front and rear cover of the color belt box, and look at the passage of the strap without a gear. A: Straight: The selected band should be flat, B: You need to reverse the ribbon to pass normally, indicating that it means that it can be passed normally. It means that it meansThe selected ribbon must be twisted.
2. Select the color band core. Generally, there will be a layer of plastic film with the core packaging. Be careful to tear it out first, and take the upper and lower carton (otherwise the core will be dispersed). Generally, there will be an arrow on the carton.On one side, put the core buckle in the bottom box (inside the box) of the color belt, and then drag out the paper at the bottom of the core of the core, and carefully take away the paper box above.
3. Sort out a part of the core of the band (no one side of the gear).