With the advancement of science and technology, the book booking machine has now become an indispensable equipment in office life.Although there are many people who have seen book booking machines, many people still do not know how to buy better during office procurement, and how to use various book booking machines. Then learn about the book booking machine.Knowledge.
Booking machine maintenance method
The motor makes a sound slow or not rotating
Reason for failure: One of the phases is disconnected from the machine.
Elimination method: Fix one of the power supply to find the card and eliminate it.
The binding machine does not turn power on power
Causes of failure: The circuit has no voltage, and the switch is in poor contact.
Elimination method: repair the power repair switch.
Stopping in the normal work of the binding machine
Causes of faults: disconnected on the circuit, the power supply is interrupted.
Method: Repair the road and repair the power supply.
1. Avoid placing the whole machine in direct sunlight and strong light.Do not exceed the capacity of the hot glue cover.
2. Other foreign bodies are prohibited in the heating tank.
3. Select a beautiful and firm hot -melt sealing sleeve. Do not use the sealing of the spine to make a seal set for plastic materials for binding.
4. If a foreign body is prohibited from entering, when there is a foreign body falling in, the power must be turned off before removing.
5. The heating board is forbidden to heat it to other objects.
6. Keep the binding slot clean to prevent any liquid from splashing.
7. Do not use your hands to step up to step up the push board.
How to repair the binding machine failure
The motor makes a sound slow or not rotating
Reason for failure: One of the phases is disconnected from the machine.
Elimination method: Fix one of the power supply to find the card and eliminate it.
The binding machine does not turn power on power
Causes of failure: The circuit has no voltage, and the switch is in poor contact.
Elimination method: repair the power repair switch.
Stopping in the normal work of the binding machine
Causes of faults: disconnected on the circuit, the power supply is interrupted.
Method: Repair the road and repair the power supply.
What should I pay attention to when using the binding machine
1. Careful inspection of the binding paper before drilling, remove the debris that is susceptible to damaged knives such as the large head needles, queen needles, booking nails, magnetic cards, tapes, etc., otherwise the damage will be damaged.
2. When the machine works, it is strictly forbidden to touch the drill knife or put your hand under the drill knife or the cardboard.When loading and unloading the drilling knife, the power switch should be turned off to avoid accidental operation that causes the operator to be injured.
3. When drilling, the temperature of the drill knife is very high. Do not touch its surface with your hands to avoid burns.If you need to replace the drill knife, you must wait for the drill knife to cool down before disassembling.
4. After each drilling, be sure to remove the binding tube from the pipeline port, so as not to confuse the binding tube with the next drilling, which will affect the quality of the binding.If the length of the last paragraph is not enough, please insert a new binding tube, remove the drilling knife, and then operate it again (without drilling the pipe), remove the suitable binding tube with a suitable length for riveting.
5. Please determine that the glue is dry before binding. If the glue is not dry, the binding will affect the life of the drill.
6. Try not to punch holes in the original holes when you are unskilled, and reserve a certain side distance when you bind it. Dont be too back.