The toner cartridge, also known as the light sensor, is generally made of aluminum into basic substrates, and the sensitivity material on the picture on the base material.How to replace the toner cartridge and how to save the toner cartridge?Lets take a look with the editor together!
How to replace the selenium
In the first step, first turn off the power supply of the device to remove the toner cartridge, then clamp the metal nail on one side with a pliers, and be careful out of it, or directly nail in the selenium.At the time, we can find that the toner cartridge can be divided into two parts, with a magnetic roller, and the collection part of the waste powder with light selenium.
Next, look at the powder supply part, first spin the screws on the side of the magnetic roller without gear, open the plastic cover, and then clean up the carbon powder in the carbon powder warehouse and the magnetic roller with a soft brush.Then reinstall the magnetic roller and press hard to prevent the magnetic roller from getting away from the original position.At this time, you can install carbon powder. After shaking the carbon powder, slowly pour it into the powder supply warehouse, and fix the magnetic roller. Finally, you should gently rotate the gears at the end of the magnetic roller.Fan is evenly attached.
Finally, the collection part is because of the need to replace the new light drum.Therefore, we adopt the same method to dial the fixed nails, remove the light drum, and then clean up the waste powder collected by the waste powder. Pay attention to it as clean as possible to avoid affecting the quality of the new drum.Its right.
While maintaining and replacing the selenium, you need to remind you again:
1. Clean the toner cartridge does not have to be too frequent. It is forbidden to scrub with ordinary paper during the cleaning process.
2. During the above maintenance and replacement process, it is strictly forbidden to touch the surface of the light drum with your hands, and at the same time, it is necessary to prevent hard objects from colliding.
3. Try not to let the toner cartridge directly expose to the sun or strong light source. Do not open the shield on the toner cartridge. If it is exposed to the strong light for more than ten minutes, the light drum will be declared scrap.
4. Avoid using and preservation in high -humidity, high temperature, and high -cold environment. Once the carbon powder in the toner cartridge will be lined, it will affect the printing effect or cause the printing effect.It is best to put it on for a while for at least an hour.
5. Do not rotate the OPC drum core with your hands without authorization. You must pay attention to the direction when the OPC drum core is rotated. If the direction of the rotation is wrong, it will damage the parts to cause powder and printed stains when printed.
6. The toner cartridge has a visual device. It is a roller covering magnetic particles. Therefore, it is necessary to ensure that the toner cartridge is far from the magnetic substances such as the display, hard disk, speaker, to avoid magnetization, which affects the print quality.
Chronin preservation method
Clean regularly
When the toner cartridge is used for a while, it will be polluted more or less. We find that the output text, images are blurred, gray worse, and glyphs grow.
Removing waste powder
For users who add powder, after a period of use, the waste powder collecting warehouse will accumulate waste powder. If it is not clever in time, it will affect the printing effect, which will cause the phenomenon of powder leakage.
Dont let the toner cartridge be overloaded
Anything has its working load. However, the toner cartridge is an organic silicon light conductor, and there is also a problem of "work fatigue".If it is continuously used for a long time, it will affect the printing effect, and the strike will be proclaimed. Therefore, users must remember to appropriately give the toner to a rest time.
Tonic life
Chronid life refers to the number of paper printed by printers that can be printed by printed machines.The larger the amount of paper that can be printed, the longer the life of the toner cartridge.The length of the toners life is determined by the sensitivity.For small and medium -sized office users with relatively difficult printing tasks, they should be willing to pay for higher monthly printing loads (more than 10,000 pages) and long life selenium (life span can reach 20,000 pages).The reliability of the models is generally prominent, otherwise it will greatly reduce the printing efficiency and increase maintenance and overall printing costs.