Many, deleting is unsafe. It is a relatively stable method to use the paper shredder. According to the different levels of the paper machine, there is also a difference between the purchase of the paper machine.Suitable for self -use paper machine.Lets take a look with Xiaobian!
The structural principle of the crusher machine
There are two major components of the paper machine "cutting knife" and "electric motor". The belt and gear are connected closely together. The motor drives the belt and the gear, and the energy is transmitted to the paper cutter.By turning the knife, the paper is chopped with a sharp metal angle.
How to choose a paper machine
Crushed paper volume
Generally, the amount of paper can be broken 13-15 pieces each time, and a large piece of paper machine can be broken 60-70 pieces each time. The opportunity for the large amount of paper with a large amount of paper is slower than that of small.
Shredded paper speed
The speed of broken paper must be matched with the amount of paper. A low -frared paper volume but too high -speed crushed paper opportunities make the broken note curl, so that the bags that are loaded with crushed paper need to be replaced frequently, and a large amount of dust is generated.Generally speaking, the computer paper will automatically enter the paper shredder. The minimum speed requirement should not be less than 0.5m per second, that is, the computer paper with 6,400 sheets can be processed per hour.
Paper mouth width
Since the area of ??the computer file is wider than the general office file, it is usually 9*11 or 11*15. The crushed paper must be entered vertically with the incision. OtherwiseToo thin, the paper will be folded together, reducing the number of shattered samples at a time, and it is easy to lead to paper plugs, reducing work efficiency.Therefore, the dedicated computer crusher machine should have at least 385mm wide at the entrance, which is the lowest standard.
Shattered paper width
According to the destruction data standard, the computer printing files must be broken to more than 3.8mm.For the height, the paper -cut paper -cut paper machine should be used to shatter the files with a width of at least 1.9mm wide and 15mm long waste paper to ensure that the data is confidential.
protect environment
In order to respond to environmental information, generally the volume of the paper of the paper is higher than 62 decibels, and the volume of the paper machine with a large amount of throughput will be large, but the design of the new trend will be mainly low.Enjoy a quiet working environment. At the same time, waste paper can also be recovered and reused. Broken note can also be used as packaging materials, which not only saves costs, but also supports environmental protection.
The use and maintenance of paper crusher machine
1. The tools in the machine are precise and sharp. Please pay attention when using. Do not get the corners, ties, hair, etc. into the paper mouth to avoid accidental damage.
2. After the paper barrel is full, please remove it in time to avoid affecting the normal work of the machine.
3. Do not put fragmented cloth, plastic, tape, hard metal, etc.
4. In order to extend the life of the machine, the amount of paper scraps should be lower than the maximum crusher of the paper specified by the machine. It does not indicate that the machine with the fragmented disc, disk, and credit card. Do not put it in the machine without authorization.
5. Clean the machine shell. Please cut off the power first. Use a soft cloth to dip the cleaning agent or soft soapy water. Do not let the solution enter the inside of the machine. Do not use bleach powder, gasoline or dilute liquid brush.
6. Do not let the sharp objects touch the shell to avoid affecting the appearance of the machine.