As far as the current touch all -in -one market is concerned, due to the different touch screens used, it will cause certain differences in appearance and price.There are common touch screens with capacitive screens, resistors, electromagnetic screens, voltage screens, and infrared touch screens. So what should be paid attention to when using a touch all -in -one machine? How to maintain the touch all -in -one machine?
What do you need to pay attention to when using the touch all -in -one
1. The touch screen part is glass products. The glass corner is relatively sharp. The assembly needs to bring gloves/fingers. Do not impact the touch screen.
2. Avoid directly attracting the line to pick up the touch screen to avoid pulling the pulling movement to the leading line, and the outlet to enhance the plate cannot be bending.When the line is assembled, it must be inserted horizontally.
3. When taking the product, you need to operate a single piece, and put it lightly to avoid the products surface.
4. When the surface of the cleaning product is cleaned, use a soft fabric (deer skin) to dip the oil ether to wipe it. Do not use corrosive organic solvents to wipe the surface of the screen film, such as industrial alcohol.
5. Do not stack the touch screen.
How to maintain a touch all machine
1. Wipe the screen with a dry cloth every day before turning on.Wash the dirty fingers and oil stains on the touch screen with a glass cleaner.
2. Water droplets or drinks fall on the screen, the software will stop the response, and the water droplets need to be wiped off.
3. The touch screen controller can automatically determine the dust, and you need to wipe the touch screen with a dry cloth.The order of the power supply is open strictly, that is, the order of turning on the power supply is: monitor, audio, host.Closing is carried out in the opposite order.
4. A large number of temporary files are generated on the hard disk. If the power off is often turned off or the Windows is turned off directly, it will soon cause the hard disk error.Therefore, you need to run the scandisk to scan hard disk errors on a regular basis. It is best to set the secret method to exit the program and Windows for re -power off.
A small problem with a touch of all -in -one machine
1. How to clean the multimedia touch all machine?
Spray it on the towel with a glass cleaner or alcohol, and then use a towel to rub the glass surface.Under normal circumstances, you can directly remove the dust on the glass surface with a dry towel.If it is a touch display, you can use a business card or hard paper to simply wipe the dust through the gap between the front cover and the touch screen.
2. Does dust affect the use of use?
The dust in the display area will not have any effect on the touch query all -in -one, but if the reflex stripes around the touch screen cover too much dust, the touch screen will gradually lose the touch function.At this time, cleaning the dust around the touch screen can return to normal.You can use a business card or a bank card to put on a thin cloth strip through the gap between the cabinet face frame and the touch screen.
3. What is the status of the touch control box indicator?
When working normally, after two seconds of boot, it goes off after three seconds. After the start is completed, the touch time is bright, and it goes off when there is no touch.For other states, check the hardware connection.