What is the difference between a splitter and a paper cutting machine? The paper cutting machine is cut flat and cuts the paper, and cuts according to the specified size.What are the categories of paper cutting machine? Let ’s take a look at the relevant knowledge of the paper cutting machine together. I hope you have a more understanding of the paper cutting machine after reading it.
What are the categories of paper cutting machine
The paper cutting machine consists of a paper -cutting machine and industrial paper cutting machine. There are many types and different degrees of automation.
1. Destiny use of paper machine
Life paper cutting machines include toilet paper cutting machine, napkin paper cutting machine, paper pump paper cutting machine, square paper cutting machine, plate paper cutting machine, hand -made paper cutting machine, napkin paper cutting machine and other paper cutting machines compositionEssenceAccording to different paper products, the corresponding paper cutting machinery is different.
The toilet paper cutting machine is more referring to the zing of the tape, which is to cut the taper cut machine used to cut toilet paper rolls.The tape -cutting paper machine is equipped with an automatic knife grinding and an active panel device, which can be cut into the required roll paper products according to the length and width of the required.
2. Industrial use paper cutting machine
Industrial paper cutting machines include manual paper cutting machines, electric paper cutting machines, CNC paper cutting machines, etc., which are mainly used for cutting of industrial paper or other products.
Suggestions: If you need to find a paper cutting machine for industrial, you should try to understand the use of product as much as possible, so that it is convenient to find the corresponding equipment manufacturers.
What are the differences between a splitter and a paper cutting machine
1. Cut the entire roll or whole raw material for fixed length. For example, plastic packaging materials, packaging cartons, steel plates, film, leather, wood chips, etc. are divided into segmentation.
2. The segmentation length can be set continuously. If there is an error in the actual section of the cutting length, it is easy to calibrate the parameters.
3. Divide control control of the paper separation machine is divided into two types: static and dynamic division: accurately stop when the set length arrives, and then static separate processing. After the division is cutThe stop signal is issued, and the semi -cutting machine is dynamically cut into processing during the material movement.
The main points of daily maintenance of the paper cutting machine
1. According to different seasons, the appropriate hydraulic oil is selected.Use No. 20 oil to maintain the liquidity of the paper cutting machine in winter; use No. 30 oil in summer to maintain the viscosity of the paper cutting machine.
2. Keep proper hydraulic pressure.If the pressure is too large, the sealing circle bursts; the pressure is too small, and the blade cuts appear weak.
3. Apply a paper -cutting platform and blade mouth with talc powder or paraffin.This is to reduce the friction resistance of the paper and the platform, and save effort; the second is to extend the number of cutting times of the blade to ensure that the tailoring of the paper is smooth and neat.
4. Add lubricating oil.Before work, add lubricating oil to the mechanical oil port, keep the machine lubricating and clean, and does not produce noise, so that the paper cutting machine is often in a good working state.