How to save every penny of you in the process of using the high -definition inkjet machine, and how to bring your equipment to you greater profits, this is what everyone is considering, but what is the effect?Obviously, extending the service life of the nozzle is one of the means to reduce costs.I visited a lot of customers and summarized the daily use attention and maintenance experience of the inkwwing machine from their various usage situations. I hope to give you some help.
What are the operation methods
Customers who use high -definition inkjet machines for more than half a year, their environment is neat, the fuselage is not sticky, and there is a reasonable management system.I used to encounter such customers, and the environment did not say first -it could not be enough at all, the machine was full of dust, and customers and employees also said in unison, it doesnt matter, dirty, messy, will not affect the machine, it will not affect the machine, it will not affect the machine, it will not affect the machine, it will not affect the machine. It will not affect the machine. It will not affect the machine. It will not affect the machine.The life of the nozzle.This is probably part of the typical Chinese. Fortunately, such customers are very small. They may not realize that dust can easily enter the main ink can and then enter the sperm tank.life.It is conceivable that no nozzle can be used for more than three months; at the same time, many customers have been lost.
Spiring head cleaning and maintenance
After all the printing operations are completed every day, the nozzle is blocked to keep the nozzle and avoid blocking the nozzle due to the volatilization of the solvent -based ink.
1. Turn off the equipment power supply.
2. Wash the moisturizing sponge with a dedicated cleaning solution, and then pour the cleaning solution on the sponge to wet it.
3. Shift the head to the right at the right end and close the nozzle with the moisturizing sponge.
4. Keep this state for the equipment to spend the night.
Sprinklers and nozzle maintenance skills
The injet machine is the core thing of the inkww vimer. The spray head is broken equivalent to scrap. Buying a new nozzle is expensive.Therefore, the inkjet nozzle is very important.
Common faults of nozzle head in inkjet heads: ink of ink, nozzle head blocked, nozzle drops, sketch head, sprinkler polarized needle, no spray head, and so on.
In summary, most of the common situations are caused by the jet head blocked and improper operation, so you must pay attention to maintenance during the operation.
For the above failure solutions: replace the sprinkler filter, sprinkler cleaning, nozzle film, polish film grinding, circuit adjustment, etc.