Barcode printer is a dedicated printer, which is generally used to print the brands brand identification, serial number logo, barcode logo, etc.The method of setting a barcode printer is relatively simple. First, connect the power, calibrate the paper, and then set the working mode. Finally, the printing software is set.Lets take a look with Xiaobian below!
What is the method of barcode printer setting
1. When getting a label printer, the necessary operation is to install the power, data cable, and consumables.Although simple, users still forget in actual operation.
2. Calibration paper, this operation is to allow the label printer to identify the label normally, ensuring that the label can be accurately transported during printing, so as not to cause waste.
3. After the most basic operation is completed, it also needs to set the working mode of the label printer according to our use needs.For example: "Did I print thermal label, or do I print the heat transfer label?", "Need to tear paper after printing? Cut the paper? Or the paper stripping function?" And so onOnly to achieve it.To set these functions, users need to set up the operation panel and LCD menu before printing, find the corresponding functions and select, simple and fast.标签打印机的LCD菜单设置功能很全，包括了打印黑度，速度，界面语言，打印方式，撕纸模式，切纸模式，剥纸模式，探测方式，串扣速率，校验位，数据位，Date, network port, default gateway, IP address, subnet mask, detection length, offline printing, as well as tearing paper, positioning, cutting paper, stripping paper bias adjustment, print content level, vertical offset adjustment, and so on.
3. The settings of the computer mainly include settings with drivers and printing software.Similarly, these are also based on the actual situation of users.Users often ask: "How should my label size be set?" "How much should I set up to print black?" "How to design the label layout I need" and other similar issues, these problems can be set in the software part.
Set the point of the barcode printer
1. Type of label
Including: label with spacing positioning, labels located with black labels, labels or continuous paper with round hole positioning, can be set in the driver.
2. The actual size of the label
Use the ruler to measure the high and width of the actual label, and set it at the corresponding position of the software (note: fill in errors in height can easily lead to interval printing).At the same time, if the label is multi -row and multiple columns, the label height is also required to be filled in the number of software and the number of columns in the software.
3. Material of label
According to the different label materials, the user needs to choose the matching carbon belt for printing. The black degree settings of the print also need to be adjusted accordingly. Specifically, you can consult the local consumable sales point.
4. Tiecalation
Users can start designing the label content and typography requirements they need. Generally, it is designed in the printing software randomly comes with the label printer.
Cleaning method of barcode printer
1. Clean the print head
To clean the print head regularly, the cleaning tool can be used with cotton swabs and alcohol.Turn off the power supply of the barcode printer, please keep the same direction when wiping (avoid dirt residue when wiping back and forth), turn the printed head up, remove the strap, tag paper, and use the cotton swab (or cotton cloth) with a printed head washing liquid., Gently wipe the print head until clean, then gently dry the print head with a clean cotton swab.Keeping the barcode printed head clean, you can get a good printing effect. The most important thing is to extend the printed head life.
2. Clean the sensor
The main purpose of cleaning sensors is to allow the machine to operate normally without any paper measurement or carbon band errors.If you do not make cleaning for a long time, the dust that is dispersed in the air will be deposited on the sensor. After a long time, when the light source feels to a certain extent, the machine will have faulty movements.The sensor includes the strap sensor and the label sensor. The location is to see the instructions. The cleaning method is to scrub the sensor head with a cotton swab with alcohol. After cleaning, dry it.
3. Clean printer rubber stick
The printer glue stick can improve the printing effect. During the printing process, the label paper will leave a lot of powder on the rubber stick. If it is not cleaned in time, it will hurt the print head.The tool for cleaning the printer glue stick can be used with cotton swabs and alcohol. After cleaning, it must be dry.
4. Clean the printer drum
After cleaning the print head, clean the drum with a cotton swab (or cotton) soaked with 75%alcohol.The method is to rotate the roller with your hands, wipe it, and dry it after cleaning.The cleaning interval between the two steps above is generally once every three days. If the barcode printer is used frequently, it is best to once once a day.
5. Clean transmission system
Because the general label paper is non -drying, its glue is easy to stick to the axis and channels of the transmission. In addition, there is dust, which directly affects the printing effect, so it needs to be cleaned frequently.Generally once a week, the method is to scrub the shafts, the surface of the channel, and the dust in the chassis with a cotton swab (or cotton) immersed in alcohol. After cleaning, dry it.
6. Clean in the paper guide slot
The guide slot generally does not have a big problem, but sometimes it is a problem with the quality of the label, which causes the label to stick to the guide slot. It must be cleaned in time. When cleaning, it can be removed directly.